invalid
Sorry to agree to disagree. What you are referring to is the instantaneous peak load response and what you would call droop in that particular measurement, measured in microseconds. To some extent effected by wire gauge and contact resistance in the power delivery circuit, source impedance etc. My point was you would need a great deal of that differential to notice a 15 or 20 amp circuit difference. This can be verifiable if you want to take it to that level. Sometimes sound science and engineering are good things so people aren't wasting their money on snake oil. Again no disrespect to your opinion.
joshziggie2021
In your particular case, I am indeed puzzled by the specs you are stating. 4kW for subs and 3.4kW from other amps? This represents a truly incredible amount of energy and, in your case if you are experiencing anywhere near these load values, that would best be served by a minimum of a 60 amp circuit at 120VAC, (30 @ 220VAC)Running 6 or 8 AWG cable. Those load values would be similar to a sound reinforcement system for a small stage. Please guys, I do this for a living. I'm very much all about a solid power supply system, but science and math should dictate, not guesswork.