Advice on Phono Stage

What is wrong with tubes? I recently traded up from an ARC PH3 to a used Aesthetix Io and was so blown away I subsequently purchased the companion Callisto line stage. These are world class pieces with the stock tubes in 'em and with low noise NOS tube selections in the right spots...

Thomasheisig I think you hit the nail right on the head. I think cold may have been the description I was looking for. The PH3 does have tubes, but you would never know it by the way it sounds. I have a ARC CD2 cd player that sounds more natural and it is all SS. They are both made by the same company and their sonic signature is different. You are the second person that mentioned the Klyne. It may be what I'm looking for. Thanks for the advice.

I have an ARC PH3SE and I have never felt it to be dry, cold or clinical sounding. Try a less wiry preamp and different cables(I love the audio tekne cables with this phonostage). Also I assume you have the tube dampers installed, if not get them. Try vibrapods under the unit and get a versalabs woodblock rfi filter with a good power cable. Try the inexpensive but great monarchy cable.

I agree with Jimstrange. The problem you are describing is due to the 6dj8 tube used in the PH3SE. The preamp does not sound dry or cold it just does not sound right (like the real thing unless the right associated components are used with it) This problem can be solved quite simply. If you are using Cardas interconnects between the phono preamp and pre insert a Cardas power cord on the PH3SE. If you are using Discovery interconnect cable between the phono preamp and preamp insert a Discovery power cord on the PH3SE (you will need to try different versions to get the right mix). This will solve the problem that you are describing.

I have a ph-3. I don't find it to be bright in any way. In fact I find it to add warmth and smoothness to the system. You might try a pass labs aleph preamp or experiment with cabling. I used to have that combination with the ph-3 and it was quite nice. You might also try to re-configure the phono stage - are you hearing cartridge overload ? You can solder in some resistors that came with the ph-3 to alter the loading. Another alternative to cartridge loading is to try a different input on your preamp. Some preamps will have less sensitive inputs to accomodate high output sources. The ARC ref1 is an example of this. For solid state, one of my friends a/b compared my ph-3 to a Klyne 3.5 (?). He said the klyne was much better (he's a spectral owner, so you know his tastes!).

I am currently using the ph-3 with a BAT vk-5i & vt100. It's a WONDERFUL combination for me. I have a feeling the vk-5i might cloud up your systems ultra-pure sonics. That's is what I found when I ran all pass labs/audio physic. My pass labs aleph 2's were consistently better suited to an ultra-quiet solid state preamp (adcom 750 or pass labs p) than to a tube preamp (audible illusions, bat vk30). The tube preamps just seemed to take away that 'wire with gain' quality of the alephs and did not add much tube-wonder soundstage. Email me if you are selling your ph-3 SE !