Amp recommendations for Tannoy Canterbury SE

Hornguys, thank you for your response. Appreciate your inputs on couple of points :

1. I had initially toed in the speakers as per the manual in "intensity stereo toe in" mode or "crossfiring" mode. However, yesterday I followed the "Get Better Sound" book to toe them in such a way that they crossfire 1 feet behind listening position. Is there any recommendation on what is the best approach that works for the Canterburies ?

2. Are there any tips in setting up the fine tuning settings in front of the speaker ie "Energy" and "Roll off" ? I could not get much difference between these settings; perhaps bcos I didn't play the right music that covered those frequencies. In any case, I guess these are the final tuning parameters once the speakers are dialed in, correct ?

Appreciate your inputs.

Dover and Dave72, thanks for your responses. It appears that good powerful amp is preferred to control the base. To implement Dave72's suggestion, I would need a preamp with two outputs. Nevertheless, it is an interesting point to understand theoretically if there are any disadvantages in combining solid-state with tube or rather two different types of amplifiers. My own opinion is that this may not be a good idea since both amps' will have different characteristics including gain etc which might compromise heavily on the "coherence" and/or "integration of the sound", due to lack of a better word. But will be curious to see if someone has got good results by setting up this way.

You guys gushing about the Canterbury are not helping my medium-term financial situation... AT ALL :)

Wilfredt,
I never liked extreme toe-in (i.e. crossing in front of your head). I've had mine crossing just a touch behind my head. As for the crossover controls: always ended back at 0dB flat. There are times I've *wanted* to dial the treble down a couple dBs, but those controls always seemed too heavy handed; also felt like some of the dynamics and detail were being robbed. That's on the Kensington SE, though. With the right tubes in my amp now, I get the perfect balance on 0dB settings.

Must warn you I've also become a die-hard tube & vinyl fanatic; I just won't give SS a 2nd look these days. That's my prejudice to bear :)

As for a passive vs. active preamp - with the LOMC carts I use, passive preamps are not a great option; need that extra gain. The Rogue Hera II and VAC Renaissance Mk III are excellent sounding preamps with high gain (> 20dB), though note that will be *too much* gain for somes systems, especially those with a digital front end. With your 96dB Canterbury SE, you would likely hear a soft noise floor from your seating location (with no music playing) using such a high gain tube preamp - perhaps 9 to 16dB gain would be more ideal, there.

You may already be aware that it looks like Jim Smith has been powering his Canterbury SEs with Viva 845 amps - if not, check out Jeff Day's blog. Sounds like he was a pretty happy camper as of a couple months ago...

Mulveling, thanks for your tips. I will need to introduce a good preamp with the right gain as you suggested, at some point in time in the future. But that's when my own financial situation improves ;) or after I sell my Dali MS5 speakers !