Articles You Feel Should be Shared
In Memoriam: Siegfried Linkwitz, 1935–2018
by Robert E Greene. As well as a general appreciate of Linkwitz, REG presents a somewhat detailed, but non-technical, explanation of why sometime a dip around 3000 Hz makes music nicer sounding, and in a sense more realistic. |
I enjoyed both articles very much. I’ll make a filter with a dip in the 3000Hz region and try it out. Here is a link on problems with digital audio and how they have pretty much been figured out, take into account the article is 12 years old and technology has been catching up. https://www.soundonsound.com/techniques/digital-problems-practical-solutions |
mike_in_nc Err... just when I had accepted that the BBC (Gundry) presence dip had been discredited. "I've heard mention of 'the BBC dip' or 'the Gundry dip'. What does that mean?" "There is much myth, folklore and misunderstanding about the 'Gundry presence dip'. The 'BBC dip' was a shallow shelf-down in the acoustic output of some BBC-designed speaker system of the 1960s-1980s in the 1kHz to 4kHz region. The LS3/5a does not have this effect, neither in the 15 ohm nor 11 ohm, both of which are in fact slightly lifted in that region. According to Harbeth's founder, Dudley Harwood, who ran the BBC's design department during the time that this psychoacoustic effect was being explored, it was introduced initially to mask coloration in the vacuum formed cones available at the time. Whilst reducing speaker output in this audio band achieved this, it subjectively pushed the listener away from the speakers as the stereo-listener's sound stage subjectively receded behind the speakers, which is unobjectional for acoustic music, but takes the life out of non-classical music. An alternative strategy employed or in combination with the Gundry dip is the application of heavy glue (dope), usually by hand brushing, to the surface of the cone to ameriorate latent coloration. The Harbeth RADIAL™ cone has no coloration issues so does not need to use the BBC dip, nor cone doping, to disguise latent mechanical problems. You can explore the sonic effect of depressing the presence band for yourselves by routing your audio signal through a graphic equaliser and applying a shelf-down in the 1kHz to 4kHz region." https://www.harbeth.co.uk/speakers/faq.php Still worse, this from the REG tribute article. "This is something important. My personal view is that it accounts for a large percentage of why musicians and other people who listen hard to live music but not so much to audio think that audio does not sound right compared to live music. I recall Lincoln Mayorga telling me that his goal in co-founding Sheffield Lab was to try to make recordings that sounded as much like a real piano as the recordings Artur Schnabel made in the 1930s, compared to which, and to reality, modern recordings were too “bangy.” This simple EQ change would do a lot to rectify the difference between recorded and live in many cases. A second point to note is that Linkwitz suggests the idea of making the matter adjustable. The idea that one particular non-adjustable speaker could be ideal for playback of all recordings is not on the table here." Did Siegfried Linkwitz really suggest that some form of equalisation is more or less compulsory? Even in his own designs? Why is high quality audio playback so complicated? It's that word 'quality' isn't it? |
