Yogiboy, the given compliance of the cartridge, according to AT, is 20 at 100Hz. I multiplied by 2 to give a rough approximation of the compliance at 10 Hz, which gives 40 cu. I don't disagree with you at all, but the equation softens the effect of changing M or C, because you are taking the square root of the product. So, rather large changes in either parameter don't have as much effect on the resonant frequency as one might expect, which, coupled with the fact that we don't really know the compliance of any one sample of any cartridge, is why I take a laissez-faire attitude toward the whole thing. You probably could increase effective mass by 6g and still be within a reasonable lower bound of F for the ensemble. There is just no reason to do it.
AT-95ML on a Pro-Ject Debut Carbon
I just upgraded my stereo system and it’s revealed how lacking my turntable is, so I’ve ordered a Pro-Ject Debut Carbon (without a cartridge) for a couple hundred bucks, without a cartridge. I plan on throwing the AT-95ML from my current turntable onto the Pro-Ject.
I know a VM540ML would be a "better" fit due to it being higher compliance, but the 95ML is what I already have.
My thinking is that some weights behind the cartridge should overcome the compliance issue and give me a solid (for the money) turntable setup.
Is there anything I’m overlooking? I ran the compliance calculator and it seems around 6g of additional weight (not including the screws/mounting hardware) should be enough to overcome the compliance issues.
Setup will be a Pro-Ject Debut Carbon with a VM95ML -> Fosi Audio X2 phono preamp with some GE 5654W’s -> Tubes4Hifi SP12 PreAmp -> VTA ST-120 with Sovtek 5660WE’s -> B&W 702s2’s and a KEF R400b subwoofer.
- ...
- 12 posts total
Dear @mephiloco : The 95ML is just fine with your new TT/tonearm. I own it and it's a very fine cartridge and way better of what its low price can shows. Go a head with.
Regards and enjoy the MUSIC NOT DISTORTIONS, R. |
On the vinyl engine, Dynamic Compliance is 10 at 100Hz so at 10Hz it's a round 17. So it will work in any tonearm with medium effective mass. I own a VM95ML and I have used it on Roksan Nima that has a mass of 11g. Playback is very good for low-cost mm cartridges. The VM95ML will work fine in a Pro-ject arm. |
- 12 posts total