2. cables
  3. 119303-1522

Bass is not enough !!! Speaker problem? Speaker cable? Power Amp? PC of Power Amp?


The bass is not enough!!  Not sure which part is not good enough. Can anyone give any idea??

My system:
Speaker: Sonus Faber Amati (SC = Jorma Prime)
Power amp: Esoteric A80 mono blocks (IC = Transparent Opus MM )
Pre-amp: Esoteric C-02 (PC = Jorma Prime)

PC for Power Amp:
I had been using BMI Oceanic Statement。The sound was beautiful, but the bass was not low enough.
I changed to NBS Black Label II 。The bass was better, but still it was not good enough. However, the sound was not as good as BMI Oceanic Statement. So now I have changed back to BMI .

How I can improve the bass performance??
Amati's weak point is bass? Jorma Prime's bass is weak? 

Thanks!!

opera_lover
lak's avatar
Ag insider logo xs@2x
lak
4,623 posts
 
Although I agree with the above posts I have to ask if your speakers are phased in correctly?
Even if the + and - are the same on both speakers they still might be out of phase. I'm not knowledgable enough to (as many others are) to explain why but I know it can happen and could be an easy fix.
czarivey
5,946 posts
 
yep if wired out of phase no bass there will be with any wires or sources.
djohnson54
396 posts
 
lak makes a good point.  Even if you check your wiring and everything looks correct, one of the speakers could be wired out of phase internally.  Swap the + and - on ONE of the speakers (either one is fine) and see if things get better.  This is likely the easiest thing to try first.
needfreestuff's avatar
needfreestuff
572 posts
 
Have you considered a subwoofer? Best of Luck
opera_lover OP
17 posts
 


Thanks for all the advice.

I will check the speaker phase as the first step.

Seems my room is normal.

Seems the Source should be good?

Would it be the spike base, or Wellfloat anti-vibration platform, or even the Power Supply?

 

Here is my full system set up

Speaker: SF Amati (Spike base = Silent Mount, Audio Board = TAOC SCB-CS

| - SC = Jorma Prime

|

Amp: Esoteric A80 (Audio Board = BDR The Source carbon fiber)

| - PC = BMI Oceanic Statement (no power supply)

| - IC = Transparent Opus MM

|

Pre: Esoteric C-02 (Audio Board = CEC Wellfloat anti-vibration platform)

| - PC = Jorma Prime (Power supply = combak reimyo als-777)

| - IC = Tara Labs Zero Gold

|

DAC: Esoteric D-01 (Audio Board = CEC Wellfloat anti-vibration platform)

| - PC = Jorma Prime (Power supply = Kojo Aray MK II)

| - Digital = Wireworld Platinum Eclipse 7

|

Transport: Esoteric P-01 (Audio Board = CEC Wellfloat anti-vibration platform)

| - PC = Transparent PLMM2X (Power supply = Kojo Aray MK II)

 

All equipment/cables: 2nd hand

Audio Rack: TAOC MS MKII (Spike base = Silent Mount)

Speaker position:  away from wall = 0.5M, distance between speakers = 2M

Room size: 5M (wide) x 6M (depth), thin carpet flooring

 

Thanks............

More to discover