Beolab 5 - Four Questionable Technologies


I'm looking to buy a high-end speaker system and have become enamored by the Beolab 5 Powered Speakers by B&O.

In their literature the tout 4 technologies that set them apart.
I am not an audiophile (yet) but wonder what those with more experience think about these four ideas.

1. An Acoustic Lens technology
This means a much wider dispersion of high frequencies. Supposedly this makes sweet spot for listening is much larger. This means you can sit in different places or move around and still have optimal sound.

2. Adaptive Bass Control
This uses a microphone in each speaker to calibrate the low frequency interaction with the room. This permits a wider range of speaker placement. For example, one could be near a wall, or one could be near a corner and this would compensate.

3. Digital Signal Processing
Being all digital, each speaker is calibrated (tweaked) before leaving Denmark to match a reference speaker. This is not possible with analog systems. It assures a that all of the speakers sound the same, a sort of quality control.

4. Digital Amplification
Each of the speakers has four digital amps; one for each driver. Somehow, by being digital Class D amps they can be smaller and run cooler than other amps. That allows them to put 4 powerful amps insider the very confined space of the speaker enclosure. The high power allows peak sound levels of 115 to 120 dB.

Thoughts and comments on any of these four technologies would be appreciated.

And, if you have heard these speakers, do you think they are for real.
hdomke
There was a review on this speaker a couple years ago - I forget which magazine, but I recall it as being reasonably positive.

Technologies 2 and 3 in your list are reasonably well established. Several manufacturers have included #2 in their speaker offerings, though not necessarily so automated, but typically with positive results. #3 is usually done outside the speaker (see Tact Audio for an example) - done properly, it's a great thing, IMO.

Digital amplification (#4) is starting to become more and more common, with varying results. Presumably, the best results would come from embedding the amps in the speakers and match them to the specific drivers, as this model does. But, there are probably as many examples (or more) of bad results as good, which the technology continues to develop.

#1 sounds like typical marketing drivel.

Of course and as always, you need to listen to them in your room if at all possible. If the array of technology presented lives up to its potential, you'll have great sound in a package that is very compact. The downside is that if you ever decided you wanted to upgrade your amps, you can't, but that quite possibly would never be an issue.

What are they asking for these speakers currently? At one point, it was $25K, but it seems like they maybe came down in price.
There was a review on this speaker a couple years ago
Yes, one particulary rave review was in the Audio Critic:
Audio Critic Review

#1 sounds like typical marketing drivel.
I agree, but what if it is real? It sure seems like a good idea in theory. I gather that the research behind the was developed by an American, Dave Moulton. Here is an article by him: High Frequency Dispersion

Of course and as always, you need to listen to them in your room if at all possible.
Yes, I plan to go to a B&O showroom this week to listen. As they say, the proof is in the pudding.

What are they asking for these speakers currently?
$18,000 US
Hdomke, there are two pairs on Ebay right now, for considerably less than $18k. FYI.