Best TT plinth material, cost no object


It is said that the best material with which to build a loudspeaker cabinet is LEAD, the second best is concrete and the third is Aluminum. Only the third has been adapted by the industry, for obvious reasons.

Internal and extraneous vibrations need to be dampened or eliminated if sound smearing is to be reduced,

Now to the turntable; remove it from the influence of vibrations, internal vibrations not withstanding, and the vinyl should sound better.

Not all of us can put the turntable outside on the sidewalk where only the elements can affect the sound, but can we make the plinth so HEAVY that we can come close to removing the turntable from the sound room entirely?

Can a lead plinth, not too practical, get us as close as possible to putting the turntable outside, on the concrete walk?

Your thoughts, Ken
kftool
So, Ken, why isn't that project finished and what might you not like about the behemoth you built? Maybe that could lead you in a good direction. None of us have your skills in the first place. Many latter day belt-drive tables have virtually done away with a formal plinth and sound great. It seems based on word of mouth that idler- and direct-drive turntables do benefit greatly from a heavy, dense plinth intimately coupled to the motor/bearing. (But there are guys who like the Technics SP10 sans any formal plinth.) My own experiences with slate are in agreement with the idea that slate is very very good. (I have now made or had made slate plinths for Lenco, Denon DP80, and Technics SP10 Mk2.) But I would never claim slate is categorically "the best". Moreover, there are several different kinds and densities of slate, even within the US. For example, Vermont slate seems denser than Pennsylvania slate. I have no idea what that might mean. My SP10 plinth is made from Vermont slate.
Maplenoll top end tables were built with a platter of pure lead (ariadne 80lb platter, apollo 70lb platter), a plinth that had a lot of lead and corian. Walker audio is built along similar lines concerning the platter and plinth. These tables are not easy to set up, move or tweak as a result, but once properly set up, they do provide a very "black" background. With other tables, i found i could "tap" on the plinth and hear it out the speaker. Not so with the maplenoll, even the ligher weight ariadne reference that i initially brought. FYI, the maplenoll Ariadne signature weighs about 175 lb. The Apollo i have, about 210.
Oilmanmojo,

Didn't know that regarding Maplenoll tables...thanks for the info!

Best,
Sam
Buconerro,

Your comment regarding using a base designed for electron microscopes might seem out in left field but the thought also crossed my mind. A year or so ago I looked into devices designed by Minus K. It's their business to isolate electron microscopes and other sensitive devices from vibration. The theory behind their design was convincing enough that I asked them to build one for my table. It was built to isolate a 750 lb load from lateral and vertical vibrations lower than those I should encounter. When the beast is assembled I'll see how well it works.

Ken
Lewm,

That is one of the many questions my wife continues to ask me.

Since I began the project I've gone through a few changes that have ALL pushed off the date of completion. The last was a year ago when I decided to add a 50 lb lead disc to the platter. I located a foundry to cast it, a tool and die shop to machine it and then months to have Sota machine a longer vacuum spindle and then put it all together. The new platter is staring at me right now.

Between Albert and a good friend in our local audio group, who hosts the Kenwood L 07D website, I thought I'd look into a direct drive table. A year or so ago I found a Denon DN 308 on Audiogon and bought it. This table is beautiful, except for the mdf plinth which will have to bite the dust, and had I bought it before I started the monster I would've saved $$$.

I have no misgivings about finishing the table I began 3 years ago but the urgency has diminished, SLIGHTLY!

The bottom line is that it's fun to build things. Once the project is finished you need to find something else to build or just enjoy the project you just finished; how easy is that to do?

Ken