Best way of connecting bare wire to bare wire


Sorry if this sounds like a newbie question - I've always had speakers and speaker wires with banana type ends. Now I am trying the whole 'magnet wire' thing (solid core copper 14 awg) and also changing to Magnepan MC1's and MMG-W's. These speakers have multi-strand bare wires coming out of them, and my copper 'speaker wire' is bare as well. My question is, what is the best way to make a high quality connection between a multi strand bare wire and a solid core bare wire? Solder? Crimp connectors? Just wondering what people out there are using in this situation. Thanks!

Brad
bfrank1972
With a soldered connection done properly the solder does not make the electrical connection. The wires are twisted or crimped together, thus making the contact, and the solder is added to prevent things coming apart.

I was impressed with the Speakon connectors which I used as jacks on the wall for an in-wall system, and as mating connectors on my speaker wires. But I think they would be overkill for simply joining two wires.
www.mmxpress.com/technical/connections.htm

Good photo illustrations of wire connections.
If you decide to soldier, use the 'Western Union' splice.
Use good quality Rosen Core solder, NOT ACID CORE.

I was taught to solder by a 'Mil Spec' guy and it is amazing how much detail he went into......At the real course they will cut your solder joints in half so you can see the quality.
FWIW, I was reading an interview with a person from WBT. They prefer crimping over soldering. Their Nexgen connectors use soldering only because there isn't enough metal to crimp properly.

The previous post about crimping, then covering with an antioxidant coating and shrink tubing seems like a great way to do it if you're handy enough to do those things.

By the way, you can buy crimping sleeves individually. I've come across them at this site, where I've bought a number of things over the years. Just scroll down to the WBT section. You can even buy the WBT crimping tool and send it back after using it. They'll buy it back from you at the same price. Pretty cool.

http://www.uhfmag.com/Connectors.html

If you use wire nuts, that's a neat idea. It beats my first stereo where I hand twisted the wires together and covered the twists with masking tape (It was a long time ago). Naturally, wire nuts need to be special audiophile grade nuts with six nines copper inside the nut and hand made by Swiss mountain gnomes.
Markphd: I might add that those audiophile grade wire nuts with the six nines copper hand made by Swiss mountain gnomes would be a bargain at, say, $39 each. The risk of not purchasing a pair is that the 10's of thousands of dollars spent on the sound system would, ultimately, be wasted money without these gems. What would one rather do ? Spend an extra $78 for a pair of such obviously top grade wire nuts, or, essentially have wasted many thousands of dollars on the high end equipment that, without the wire nuts cannot approach the quality that lays buried therein.