Piezo...I am sure you do "use significantly more power on the bottom end than on the tops" and for your live pop concert application I am easy to convince that this is right. My point is that your situation does not translate directly to the home audio system situation. To get the real right answer, make some measurements. I was surprised when I did that.
Biamping; Amps w. Different power ratings?
If a person uses two amps of differing power levels, will there be a noticeable difference in volume? I've got an Outlaw Audio 755 which is 200wpc. I'm thinking of adding an Outlaw 750, which is 165wpc also. I would use the lower power amp for the bass, and the higher for the treble.
I will have a speaker system comprising four Eminent Technology LFT-8's (biwired and biamped configuration for each of them) and will use 8 channels of amplification. The four bass drivers would be from the lower power Outlaw amp (165) and the highs from the 200wpc amp.
Or, would I be better served to make one speaker completely driven by the 165wpc, and the other by the 200wpc?
I will be sending signal to all 8 amp inputs through the same preamp - a Rogue Audio Magnum 66 (which has a selectable second main out; the signal from each pair of outs will be split and delivered to the 8 amp inputs.
So, would the difference in power cause volume discrepancies between either the bass and treble, or between entire speakers (depending on how I hooked them up).
Comments, suggestions welcome!
I will have a speaker system comprising four Eminent Technology LFT-8's (biwired and biamped configuration for each of them) and will use 8 channels of amplification. The four bass drivers would be from the lower power Outlaw amp (165) and the highs from the 200wpc amp.
Or, would I be better served to make one speaker completely driven by the 165wpc, and the other by the 200wpc?
I will be sending signal to all 8 amp inputs through the same preamp - a Rogue Audio Magnum 66 (which has a selectable second main out; the signal from each pair of outs will be split and delivered to the 8 amp inputs.
So, would the difference in power cause volume discrepancies between either the bass and treble, or between entire speakers (depending on how I hooked them up).
Comments, suggestions welcome!
- ...
- 14 posts total
- 14 posts total