2. tech-talk
  3. 1229634216

Can I replace/repair a Phillips SACD transport?

My Musical Fidelity Tri-Vista SACD player (recently out of warrantee)will do longer function in SACD mode. The dealer who I originally bought it from says that the Phillips SACD transport is problematic and there is nothing that can be done to repair or replace the SACD transport. I have a faily extensive SACD library and hate to eliminate that cabacity to plyback that that format.

Does anyone know if the Phillips trasport be repaired or if a different SACD transport can be installed in the Tri-Vista?
kiplandh
electroid
283 posts
 
GTfour45 has it right. I have a still working (knocking on wood) Trivista SACD from Jan 2003 when I was a dealer. Phillips did hose them. MF did offer an exchange or paid upgrade depending on age. I think its too late now.

I would pop the cover and at least make sure the lens is clean and the rails are lubed. If you are reading redbook but not DSD it may be something simple (knocking on wood for you)

Please follow up and let us know. email me if you need instruction to do this, it's pretty easy.

ET
electroid
283 posts
 
2008 hasn't been my year. Just a few hours after my post above I went to listen to music on my Trivista and it didn't get through a whole disc. (add expletives)I will never bother to knock on wood again! I took off the cover and laser cover which requires a little T-6 torx and nothing looked odd or dirty. I cleaned some dust in the laser compartment with dry Q-tips and lubed the rails for the laser and the CD tray. I blew air over the laser which looked fine.

I also found the player wasn't level and corrected that. While apart I tried playing discs and they all played fine now! I played another disc for half an hour and used the remote to change tracks every few seconds. It seemed OK and I put the unit back together. I listened to a 45 minute disc and it cut off during the last song. Oh well, I sure have an above average DAC now. SACD's will be listed here soon. Bah humbug! I celebrated a year of being unemployed last week too, 2009 has to be better.

ET
magfan
1,583 posts
 
I have a now-ancient Philips/Magnevox FD1000, the first CD player to be reviewed by Stereophile......
Can I still get a laser for it?

Also, What transport does my CA840 use?
kijanki's avatar
kijanki
4,432 posts
 
SACD adds one more layer of complexity by using pit modulation. Modulated pit cannot be copied on standard CD-R transports and there is no SACD writers.
petredel
1 posts
 
He there,

I also need to repair my CD-SACD with Philips module SD5.2.
I found it to DAISY archive (http://www.daisy-laser.com/products/SACD/sd52/sd52module/sd52_module.htm), but they do not sale to privat users.

Thank's for future help.
More to discover