I have installed the Jubilee on the Graham 1.5. The size and weight of the Jubilee is much different than the Shelter 501 II. I had to add the extra balance weight and raise the arm. I am loading the Jubilee at 100 ohms and have played with the azimuth and VTA. I think I am close and used the Hi Fid test record to check things. Tracking is very good. I think the bass is more dynamic and quicker, very noticable and the VTA really was important here. The mids (vocals) have lost a bit of sugar (less lush) and the treble has a more detail but not at all harsh. For me its a better overall balance from top to bottom and the speed gives me goosebumps. I liked the Shelter but I am real happy with the Jubilee and believe its a very good match with the Graham.
Cartridge for Graham 1.5
Currently I use a Benz LO4 or Shelter 501 with the Graham on a Orbe TT. I would like to hear what others believe to be the best match for this arm at reasonalbe cost ie less than 2K.
The rest of the system is DIY fet-Loesch preamp with plenty of gain, Berning EA-230 and Quad original ESL's.
The rest of the system is DIY fet-Loesch preamp with plenty of gain, Berning EA-230 and Quad original ESL's.
- ...
- 29 posts total
I think its more important for me not to get hung up on the Graham being criticized because its a unipivot thus can not handle low compliance cartridges with lots of energy. I have read many posts about this and not found much about what worked. Without another arm like a Triplanar or SME V to test against I have to rely on opinions here. It is very reassuring to see all these different cartridges used on Grahams. I had considered the Sumiko Celebration and Dynavector XX-1 also. Personally I would rather purchase these cartridges over a different arm if I had extra money to spend. Sounds like the Helikon is very popular also. If I save my nickels I might be able to try another next year! If I keep this up I will have a cartridge collection also. I guess if the Graham can keep a Denon 103 in the groove it can handle pretty much anything I would throw at it. Thanks again for all the help. Carl |
Carl, make sure you experiment with the VTF setting. In my setup the recommended 2.3g doesn't sound best. At 2.3g depth layering, spaciousness and image separation/presence/dimensionality suffer somewhat. The music also sounds less coherent and engaging. It sounds good but not special at this VTF - *in my system*. Currently I have mine set closer to 2.1g (it's summer down hear in Australia, so this may be a factor). Of course the rest of your system/balance will influence your preferred cartridge settings - just a suggestion to try. BTW, I think the Jubilee sounds great on vocals - male and female - much better weight, realism and neutrality than my Crown Jewel (shelter clone). FWIW, here are my System details |
- 29 posts total