Ceramic fuses

Ricey, from all the discussion, it's clear that you are referring to a fuse in the power supply part of the amplifier. I've never tried different fuses in that location. I can't opine whether different fuses matter there.

However, I have tried different types of inexpensive fuses in the speaker circuit. Here, the difference was clearly audible. To further investigate this, I asked a musician to listen as I substituted a speaker fuse with a 'wire', in a single-blind test. The musician friend heard the difference every time and consistently characterized the sonic difference, fuse vs. wire. His description matched what I had heard while listening alone. 

There are so many variables that can confound a listening test, that to do a scientifically valid blind test is very difficult. But, if the effect is pronounced enough, a simple test may suffice, like in the speaker fuse experience I had.

In my opinion, try the fuses and see if you can hear a difference. If so, you wind up choosing the one that sounds better to you. Or, you could wind up more confused than ever. Sonic memory can be deceiving. Good luck, and hope to read bout your conclusions.

There are other factors that affected my test of speaker fuse vs wire. One is that the contact between the fuse holder and the fuse is different for a fuse configuration vs. a wire configuration. The original experiment was performed casually and was done to demonstrate an audible difference between two things inserted into a fuse holder.

The actual cause of the audible difference may or may not be the fuse element inside the fuse. Without further investigation, and controlled experiments, the actual root cause of the audible difference is undetermined at this time. I only can claim that a repeatable, identifiable difference can be heard between the two objects, fuse vs wire.