China built tube amps

As far as tube amp go I have and American made amp and a Chinese amp. Audio Research VSI-60 and a Reisong A-10. Enjoy both very much. If you’re new to tube amps the best way to start is with Chinese made. For about $500 you can get something that sounds excellent as long as you have sensitive speakers 90db or above. The tubes should be rolled as soon as possible because  the tubes they come with are ok but better tubes better sound. 

Just to be accurate for searchingfor......The Carver Crimson (it also comes in black) 275 has a very high tech board.  The Carver Crimson (also avail in black) 350 is 100% hand-wired and wound in the USA and also almost $7000 more than the 275s. I have the 350s in my main system as some of you know but I also have a pair of PrimaLuna Prologue 6 monoblocks (Chinese built) in my 2nd system.  Now the Sixes are not the 350s re power, sound, etc but they are hand-wired and their quality is excellent.  They are also self biasing so it's fun to roll tubes with them.  As a side note they sound very good with KT88s but really open up in the mid-range with EL34s.  I hate to say it but IM unprofessional O the build quality is very close to my 350s. The sound quality is also very very good driving my MB Quart Veras, (vented speaker), or Epicure 3.0 pyramids which is a sealed speaker..  I don't believe they can drive under 2ohms very easily but very few speakers need that.

Cayin makes good quality tube amps...

What?   You mean that there are still amps NOT built in China?

Seriously, a lot of very good circuits are now in the public domain and it's many of those circuits that the Chinese use.  The Shure M65 phono preamp is excellent and will run you about $500 or so on EBay.  But you can get a Chinese clone for about $150 fully assembled and less if you're willing to build a kit.  Tubes make a HUGE difference in sound, so if you get a cheap Chinese tube amp, plan on trying other tubes.