driving Verity Audio Parsifal Ovations?

I own the Parsifal Encores and have only used one amp with them - Jungson JA-200 200wpc pure class A monoblocks. This appears to work very well. Only reason I am chiming in is that in my experience, I need every single one of those 200watts to drive the P/E. If I crank up to about 100db my amp is playing at 80-90% output, so I don't quite see how any of these low powered amps could drive the P/E or P/O to high volumes.

"I need every single one of those 200watts to drive the P/E. If I crank up to about 100db my amp is playing at 80-90% output, so I don't quite see how any of these low powered amps could drive the P/E or P/O to high volumes."

***Agree w/ Edorr for the most part. I had the PE's w/ the CJ Premier 8A, Accuphase A50V, and Tenor 75WI. I had brief audtions of both an Art Audio Jota and Air Tight ATM-2 w/ the P/E's as well. The AA Jota, totally anemic, not even close. The ATM-2, borderline, tight bass, almost the best of tubes and solid state. Ultimately I could see it being adequate for most. The Tenor was the best sounding for the most part. It has that reach out and touch, holographic sound. Really quite special. It did not grab hold of that woofer though, and bass was not great. Just a great amp, but needed an 8ohm speaker.... The CJ 8A had the juice, but in it's original form was still loose and wooley in the bass. The Accuphase stereo amp was the only one that there weren't any doubts. It controlled that 4ohm woofer w/ an iron fist. of course I stayed w/ the 8A over the A50V. At the end of the day, I always go w/ tubes. Bottom line is feed the Parsifal w/ at least a good medium powered tube amp. Think mono's w/ 4 output tubes per side. Running those ATM-2's in mono would have been real interesting. All this of course IMHO.

great way of sharing all Verity experiences.
30 watts may all be what one needs, it's not about the watts it's about control and dominance and capability. aka powersupply.
Prime example the 30 watt Accuphase Class A model. small amp, low watts, big performance.

another example: the LAMM ML2.1 SET.
it has 18 watts no more, but one of the best powersupplies and output transformers money can buy.
those 18 LAMM watts sound very dominant and controlled.
that's what you pay for ;-)

watts = SPL's.
control = powersupply.

so either Solid State and Tubes can have low wattage and still sound extremely powerfull.
it's not howmuch, but how you do it.

I'm been using the 4 ohm tap on my amp as I thought the manual states the Parsifal to be an 4 ohm speaker. Am I wrong? Why do you say it's an 8 ohm speaker?

I used to drive my Parsifals with the Tenor and didn't find it as very musical. I next switched to the CAT JL2, which was a vast improvement. I now have the Music Rerefence RM9 SE and this is the best combo by far. I A/B'ed the CAT and the Musical Reference and the RM9 SE/Parsifal was way superior to the CAT/Parsifal Combo. I think you'll be hard pressed to beat this, especially when using the Wiwires I/C's and speaker cables.