EMT 927 vs. Micro Seiki 5000 or 8000 - different?


Did any one test those machines in the same set up? What was the outcome? Idler-Drive in its best built quality vs. the well rated heavy belts from Japan.
thuchan
My point regarding the stock 997 arm is very straightforward.

To spend $25,000- $60,000 on a vintage turntable where you are stuck with the stock tonearm, which is only so so, and also to be stuck with having to use EMT cartridges, because of the special diamond pin pattern, does not seem so smart.

As I mentioned, much if not all of the EMT 997 performance can be had from other 16" transcription decks, but they don't carry the EMT name, and thus are overlooked. And most of those decks allow you to use any arm you want.

I have a good friend in Tokyo who literally grew up in the vintage hifi scene there, and used to help a family friend who had an important audio company do demos at hifi shows. He recounted doing a show in which a Garrard 301 and an EMT 997 were set up side by side, with identical Ortofon long arms and SPU's. For days he would go back and forth DJ'ing the show with these two decks, so you can't really get a better comparison than that. He found the Garrard to be very much in the same league as the 997, which had a bit of an advantage, but he never could figure out why Japanese would pay so much more for one than a Garrard. He chalked it up to the rarity/cool factor.

Jonathan
Thuchan I have nothing of real value to add to your interesting subject other then a few comments.
Your system I find overwhelming and you are obviously not just a wealthy collector of equipment that was hypnotized by "A" list magazine reviews including online hype.

Your goals are clear to me and I wish you the best.
Myself,after raising six kids, five daughters & one son all of which are adult now I just recently am able to devout more time for myself and to this hobby.

I have read where some in this hobby are shocked at what it can cost, they should see the bills for five daughters, fashion trends, university then marriage, though such is reality and I'm certainly not crying in my soup.

Anyhow I find the history of some of these vintage turntables is enlightening to say the least be it belt, direct or wheel drive, all of them are noted for re-discovered virtues.I would like to note that I'm not in any one drive camp, I have Micro Seiki 1500 , panzerholz SP 10 mkii and a stock Kenwood LO7D.

I suppose no big deal here on your thread but these used re-furbished tables out performed a couple of brand new expensive tables with no trouble at all.

Anyhow, looking forward to your discoveries and by the way, these horn speakers you mention, I'm guessing, are they from Cessaro Acoustics?

Hi Jweiss,
It seems that you are making opinions on
somebody elses experience.
Thuchan has a Caliburn turntable which costs
around $80.000 and if he says EMT 927 in good condition
is better, then $25.000-60.000 is cheap,right?
I have a Garrard 301,Garrard 401 and SME 30/2A
and as good they are, EMT 927 is in a different class.
You also mix EMT 997 (tonearm) and EMT 927 (turntable)
Regards
I guess your opinion of "stuck" and "so so" is also quite subjective. I kinda remember the TSD15 was your or one of your favorite cartridges at one time or am I mistaken? The 997i is standard mount i.e. square pins, can work with most good cartridges (MC of course) and can be dropped right into a 927. Not so "stuck" anymore. Although as many know, the TSD15 and the OFD series of cartridges are up there with the best of them.

For what its worth, the 927 and 950 are quite different and can not be compared. The 927 is a whole different level of sonic performance compared to a 950. The 950 is/was great at what is was designed for- extremely fast starts for a radio station. Same can/should be said of the Technics SP series... they leave much to be desired sonically IMHO. To compare other high quality decks to a 950 is not so meanigful for me, its a good table but not "great." And you know how I feel about the 301 so no arguments from me. I'd still say the 927 is a really great table- much better than most, if not all, of the other 16" decks you mentioned- to my ears. Technically we have no contest. A EMT 927 is an engineering marvel and with the very rare exception, nothing has ever been made at this level and probably never will be again. Thats worth something or a lot depending on your personal take. Me, I'm happy to have my 927 and its not going anywhere anytime soon. I guess I'll just have to keep suffering which is better than falling off the bandwagon and risking my cueing arm.
Hi Vinyljh,

As the importer of the reproduction EMT 997 arm (Tone Imports) you have a cock in the ring on this. I don't. I'm also not comparing an EMT 950 with a 997 either. Just wanted to say I'm not against EMT- I also own one. I keep a lot of decks around as a reference.

As a huge fan of idler drive turntables, I think its great that people on this forum are discussing the EMT 997. I think its great that someone who owns a Continuum Caliburn likes a 50 year old idler drive turntable, too, perhaps even more than his $100K deck. That makes me smile.

As for the EMT carts, well, not my favorite, but nonetheless good carts.

Best,

Jonathan