First Watt SIT3 vs Dynakit ST35


For this comparison we used a Custom 6SN7 Line Stage by Don Sachs with various jazz tracks as well as classical. For speakers we used a pair of Lii Audio Silver 8 and F15 open baffle speakers run in parallel along with a 15" Caintuck open baffle sub. For the ST35 we would use the 4 ohm taps. The room is about 15x10 and well damped. If you clap your hand, there’s no audible echo. As some of you may know, I already compared the popular Decware SE84UFO Zen to the SIT3 here in the forums.

Next, I wanted to compare the sound signatures of the Dynakit ST35 to the First Watt SIT3. The ST35 took about three weeks for Kenny Russell of Funtastic Vintronics to complete because he was awaiting a few parts. The ST35 is based on the EL84 tube and mine has a matched set of quads, the Baldwin EL84’s along with a pair of Mullard’s from Great Britain on the front end. I normally like working with Kenny because his work is super clean and he’s very detail oriented. The others mentioned also do very nice work.

First, just some things to know about me. I’m one of these listeners who doesn’t care if products are not popular or well known, in fact, I mainly prefer to review less known components because there’s just way too much of an abundance of mass production amps coming from China with overly sparkly sound and excessive analytical top end. This may sound exciting when you first hear it but gets old and fatiguing after a while when listening over time. And, if you’re gonna go that route, then you may want to be careful what speakers you are selecting so the top end isn’t too fatiguing over long periods.

People often have a terrible habit of behaving like sheep, so I make it a direct point to avoid being one as much as I can and I avoid hype with a passion. For example, I don’t care much for all these YouTube stars trying to gather subscribers when in fact it’s the guys behind closed doors who are the real geniuses and most sadly go unknown to the crowd. Why? Because devoted technicians and good reviewers are usually not just reviewing marketed products and as some of you already know, I can’t stand marketing. It sways people into believing things that are often very misleading. It reminds me of pedestrians who decide to cross red lights. One person does it, so the rest decide to do it. In the end, it’s the wrong thing to do.

The guys that you don’t hear about are often the ones I want to know more about. For example, Will Vincent, Don Sachs, Kenny Russell, Holger at Erhard, Alan Eaton and Dennis Had to name a few. So, if you love tube amps and truly have a genuine passion to know more, all these YouTube stars is the wrong place to get your info from. I’ve said this before and I’ll say it again, look at Kevin’s site at Glow in the Dark Audio here http://www.glowinthedarkaudio.com/amps.html for real honest to goodness reviews from someone who really knows more on this particular subject than I ever will.

Most of the gear these YouTubers boast about is being fed to you in huge quantities via products being shipped in from China and that’s about all these YouTubers review. They know little to nothing about these beautiful unique, hand made tube amps on Kevin’s website. Google these amps with the YouTube stars and see for yourself. You’ll find absolutely nothing. To me, it’s a total shame and a sham, devised to amuse a mob with the soul agenda of getting subscriber counts in order to make a living and I have no qualms for others wanting to make a living at things. I just won’t do it at the cost of marketing others when I know for a fact there are other amazing products being made here in the US. Yes, I’m aware that some of the parts may be sourced from China, but at least if you consider these hand made amps, you have a good opportunity to speak and learn from the individuals who take the time to make them. They pour their hearts and souls into building something nice for you personally, and I believe they deserve far more credit. Sadly this industry is exactly like the industry I work in as a profession and fortunately, I can see through all the smoke.

Personally, I tend to like Steve Guttenberg because at least he expresses some heart and soul. His videos are not devised to make everything enticing and commercial-like to the eyes and mind. He seems like a pretty straight up character with a genuine interest along with an array of music choices. He’s been in the business for several decades and seems pretty sincere and level headed to me.

So, now that I’m done with my soap box rant, I’ll get on with this comparison. The ST35 is clearly one of those components nobody knows much about and that is truly ironic to me. How did this tiny amp slip under the radar undetected? It’s a great mystery to me and one I don’t think I’ll ever understand. If you do a Google search on the ST35, there is absolutely next to nothing on this amplifier other than a few exchanges, nor are there any videos on it other than a few demos and someone building them. So, it appears nobody is really reviewing the ST35 and to me that is such a shame.

With regard to the First Watt, one of the things that’s quite cool about them is that they really do tend to sound like tube amplifiers even though they are solid state. I have generally found the SIT3 to have a slightly thicker and darker sound compared to the F3. I actually prefer the F3 over the SIT3 even though for some reason the SIT3 tends to be more popular and far more pricey. A used and discontinued F3 will set you back about $1400 while the SIT3 will be just under $4000 on the used market. The F3 is an incredible bargain.

To me, the F3 just seems to have a bit more finesse up top while the SIT3 sounds a bit more brawny and muscular. Brawny and muscular may seem more attractive at first but what I have found is that it doesn’t sound quite as refined when hearing the delicacy of individual string instruments or harps for example. It tends to give string instruments a thicker bodied sound signature that tends to remind me a bit more of solid state than tubes or compared to the F3. For open baffle however, which tend to have a thinner or less meaty sound to them, the SIT3 can be a great match and perhaps even more so than the F3 to balance things out a bit. So, in my opinion, I think it all has more to do with matching the components to the speakers rather than just blanket statements that this model is better than that model. I still just happen to prefer the F3 personally.

One of the things I struggled with regarding the Decware Zen when comparing it to the SIT3 is that when turned up to slightly louder levels of 85db or more for example, there were "sometimes" issues where it would run out of steam, relative to the SIT3 which basically retained a slightly larger soundstage at higher volumes and handled quick bass when called upon more cleanly. The Decware sounds more refined up top though. This is where the ST35 came in and basically threw us for a loop. Think about a tube amplifier that has all the qualities of a Decware Zen but has far more power, bigger soundstage, tighter and cleaner bass when called upon, and an even warmer and sweeter sound. A sound that makes harps sound like silk and sounds that are even more balanced than a Zen. That’s what the ST35 does and then some. Even my friend who owns the SIT3 was dumbfounded just as was, not to mention that this little guy is only $1300 fully assembled, brand new.

At a different listening room we call the Rim, I told my friend Bob that I didn’t know if the ST35 will be enough juice to fill the room. The dimensions of the room are about 25’x15’. In this listening area we have a pair of Lii Audio Silver 8’s in parallel with a pair of Lii F18 open baffle speakers and a 15" Caintuck open baffle sub. Coupled to an Erhard Aretha preamp. We were absolutely shocked that the tiny ST35 filled the entire room with plenty of meat on the bone and even more room to play at higher levels than expected and not only that, it sounds huge. It doesn’t sound like the tiny amp it is. We were absolutely astonished at the performance of the ST35. It’s so tiny, yet it just has a tsunami of weight when using efficient speakers compared to all the others.

I normally don’t sell amplifiers and change amplifiers in search of the holy grail. I just normally collect a few and use them for different moments of listening. All that happened was that I had always wanted a tube amp that had about 8 to 20 watts and I stumbled on the ST35 by accident and gave it more consideration since nobody seemed to know much if anything about it with the exception of a few audiophiles. Since I already had the Bob Latino ST70 and used the Will Vincent ST70’s, I will tell you that this is entirely different. Will Vincent offers an ST35 but it uses the much larger chassis of the ST70 which I’m not as keen on and I think it's set up in triode mode. The model Kenny Russell made is set up in ultra-linear mode and in my opinion should produce a slightly fuller sound. I couldn’t say for sure though as I have not yet heard the Will Vincent version, but my friend has one which I am intending to have a chance to hear. He uses a pair of Klipsch LaScala’s but he doesn’t yet know if it will sound anything like this version I have now.

The original ST35 was highly regarded for the metals used in the transformers but these newer transformers may be even better. So, now I’m in a situation where the ST35 is producing sounds I find even more favorable to my ears than many well respected amps such as the Alan Eaton 45 monos, Primaluna Evo 400, Decware Zen, First Watt SIT3, First Watt F3, Will Vincent ST70, Bob Latino ST70 and many others too long to mention that Bob and I compared over time. The vast majority of my comparisons were done using the Aretha tube preamp by Erhard Audio. I think I’ve had this device for quite a few years now.

Why is this ST35 so amazing to me? Because this ST35 has the most unique sound signature I’ve ever heard in any amp I’ve ever listened to. It has all the soundstage, bass extension, balance, sweet, silky top end, tight bass, balance, darkness all in one complete tiny package and just one more thing that separates it from all the rest. It is by far the warmest sounding and it’s very audible in ways I just absolutely love. Todays modern tube amps are far from warm. They’re actually quite bright sounding. When someone tells you tubes are warm, I can honestly say the ST35 is definitely one of them. Without question the ST35 is the finest sounding Dynaco amp ever made and not by a little, but by a mile in my opinion. The ST70 is nice, but compared to the ST35, the ST70 sounds more grainy and less balanced. It's also brighter by comparison. When the ST35 is coupled to efficient speakers, say 89db or more, it works amazing, even with 4 ohm speakers. It produces the prettiest, "warmest" sound signature by far then any other.

At one point I was listening to jazz like Scott Hamilton and Wes Montgomery from 3pm in the afternoon till 6am the following day. This ST35 is like a serious drug addiction. The most significant thing you will get from this is its sweet, silky sound signature which is more than anything I’ve ever tested to date. Sax, trumpets don’t shoot out at you like other tube amps that are more colored. They come at you more subtle and at first you may think it’s not as exciting, but when you keep listening to it, it just sucks you in more and more because it’s so dang pleasant to listen to, especially when listening to jazz. During a recent session with my Klipsch Forte 1’s, I was playing Charles Mingus "Better Get Hit In Your Soul" on vinyl and there are some very subtle voices in the background. When I first heard them with the ST35 coupled to my Aretha, it scared the living c....p out of me. I could swear I heard the voices were coming from behind, over my right shoulder and I thought they were voices at my front door from the position I was seated. A totally three dimensional experience.

Always remember that many of todays modern tube amps are designed to be very analytical in sound. So, when you first hear an ST35, just remember that individual instruments don’t just shoot out in your face. Instead, they will take on a more relaxed rendition that’s completely holographic in nature and I will say that for longer listening sessions, the ST35 is by far, the most pleasing amp I’ve ever compared or tested to date. This explains why I enjoyed listening for 16 hours straight. I was dead tired the next day. If you own any type of efficient speakers, combined with a good quality preamp, you will be in for a very pleasant surprise. I was so impressed with the ST35, I ordered a second one for my other Heritage speakers and sold all my others. Why? Because this can do everything that’s needed, all packed into one, sweet little package and it delivers it in spades. So far the ST35 is my favorite amp of all time. For those of you willing to wait more than a year for a Zen, to me it wouldn’t matter if a Zen was available tomorrow, I still prefer this little ST35.

Happy Listening!

doctorD

 

rankaudio

Jason,

Is the EL84 generally used for guitar amps of less power? If so, does it still work well in your opinion?

dpd24, I’d sure be curious what guitarists have to say about the sound signature of the EL84. It’s quite unlike anything else I’ve heard so far, I can’t quite grasp it yet. Did Roger express any kind of opinion on the sound signature of the EL84. I’m trying to understand why it has such an unusual level of warmth I’m loving so much.

When I ordered the second ST35 I told Kenny I wanted it made exactly like the one I have, down to every cap, resister, whatever. He asked me for a couple of numbers to make sure it was the same, so Kenny must also be doing something I’m really liking. 

 

pinwa

116 posts

 

I've never heard either amp but I have to question your use of the Silver 8 and F15 as reference speakers.  I've built the Silver 8 in an oversized Caintuck style baffle and paired it with a sub and it is an interesting speaker and punches way above its price point but it is simply nowhere near as good an my Moabs, Magnepan 3.7's, Wilson Watt Puppy 7's or even the Acoustat 2+2's.  I also put the SIlver 8 into a Pure Audio Project Trio 15 type speaker and tonally it was better but the soundstage was flat and two dimensional.  I have no idea how you good make good judgements about these amps using those speakers.  Maybe your build is way better but I suggest you spend your time and money on improving your speakers.

 

pinwa,

Okay let's put your concerns into proper context so things don't become misleading. I never said they were reference speakers, it was just a particular speaker we used to make some of my comparisons on. However, the Silver 8 and F15 in question just so happens to be a pretty good design though. Skip to exactly 2 minutes of this video to see how this particular baffle is designed. This setup helps reduce reflections off the face of the upper side of the baffle. My theory is that foam might also help if placed on each side if a rectangular shaped baffle is used instead. I have many videos with open baffle. 

 

Where I started to run into issues was when I started using the larger rectangular baffles in my "A" frame room. I have many videos and demos you can see for yourself. Since the soundstage on these open baffles are so huge, I was having a problem where the sound was reflecting off the upper "A" frame and funnelling in to one area of the room, causing a couple of the videos to sound bad, but I left the videos there for discussions like this. I've been experimenting with wall treatments to help with that issue.

By far, most of my comparisons are made with my Forte 1's using Crites crossovers and phenolic tweeters for a sweeter top end or so far that has proven to be the case. You can see all my videos with the Forte's including all these amplifiers on the channel. Another thing I should mention is that we all know videos will not give us the full represenation of a speaker, but there are some matters that are definitely audible in videos and I think this is what the purist snobs fail to reason with. I can tell the "relative" differences such as bass, treble and more from a video. Even if open baffle speakers were my reference speakers, you can still clearly discern audible differences and tonal characteristics between different amplifiers if matched to the right speakers reasonably well. It doesn't require the greatest speakers money can buy. 

If you choose to debate speakers, that will just be an endless argument about ones personal preferences, but that doesn't negate impressions. If that's the case then why should we even bother having these discussions? If I have s.....t pair of speakers and one amp sounds better than another amp on the same s.....t pair of speakers, then it's all "relative" right? Where I draw serious concerns is Amir at ASR who uses completely inefficient speakers to evaluate low power tube amplifiers and relies only on data. That's a legitimate case where an amplifier can not produce proper effects and I just void the impressions altogether. 

 

 

 

 

That list of builders you wanted to know more about? Add Vlad Bazelkov of Audio Mirror. I have his 45w SET amps. Except for one article in Absolute Sound, he flies under the radar. By the way I bought the amp before the article came out.