Furutech AC Receptacles

wylmars 0

... I wish I had known that BEFORE I bought the PS Audio. I spoke to a lot of people before I purchased P10 who whole-heartedly support the P10 ... hmm! ...does the P10 'wastefulness' also apply to the REF 5SE and Accuphase equipment? Have I been restricting dynamics across the board?

I wouldn't dismiss your PS Audio power regenerator quite so quickly. There are many variables when it comes to AC power. In my system - with multiple dedicated 20A lines - nothing is plugged directly into the wall. That includes the ARC Ref5SE and everything else, including big tube and SS power amplifiers. Yes, I've tried plugging things into the wall directly. Yechhh. And nobody who has ever heard my system has ever thought that it lacked dynamics. Just the opposite!

@wylmars Firstly I trust by now you've learned to tale any advice you get on the internet with a pinch of salt 😏 and as @cleeds suggests you should try it for yourself, both into the P10 and into the wall.

My cavil with PS Audio regenerators is that basically they are power amps outputting clean 110V -- agreed the newer ones such as your P10 are efficient (rated 85% at peak continuous load of 1200W) but they are throwing away 15% or more energy than you need. Early ones like the original P300 (I at one point owned three) were <50% efficient and ran hot as hell.

However while the P10 is rated with enough power to drive your Ref 75 (peak load 500W) the consensus (and again you have to listen and see if you agree) is that Power amps in particular prefer a non current limited (i.e. more passive than active) power conditioning regimen, and in many cases sound best run straight from the wall. Sources (your Ref 5SE and Accuphase kit) will benefit most from the clean power the P10 provides

So to conclude -- try it all ways and see what sounds best to you -- that's all that matters

cleeds - I have been running everything through my P10. folkfreak - I will listen to hear if I can detect a degradation. There's so many different perspectives on all this power related subject. Both - thank you for your insights ...

wylmars,

Take a look at "The great AC outlet shootout" on Recent Actvity. It may save you work/ listening 

It's not the current. It's the voltage.