2. digital
  3. 1085552272

Getting more from my DAC

I need some advice. I've put together a mid-fi office system over the last few months:

Sony XE500 CDP acting as a transport
MSB Link DAC III with 24/96 upsampling
McCormack Micro Integrated Drive amp with upgraded PS
Tannoy System 600 nearfield monitors

Toslink cable between transport and DAC. Ratshack gold series interconnect between DAC and amp. Audioquest Type 6+ wire between amp and speakers.

I was fairly happy with this system until I tried connecting the Sony CDP directly to aux posts on the amp and switching back and forth between the CDP/DAC combination and the stand-alone CDP. On a straight A/B comparison, using the selector switch on the front of the amp, I hear almost no difference, even with well recorded piano music/female vocal/jazz.

This is disappointing. The amp is low powered but pretty transparent, I believe - as are the speakers, which were designed as pro monitors and have a reputation for being revealing. So why aren't I hearing a more perceptible improvement - change, even - in the sound when the DAC is introduced into the system?

Are my crappy cables strangling the DAC? Is the transport too cheapo to let the DAC do its work? Do I need to follow the MSB/Modwright upgrade path before the DAC will really shine in my system? Or is the whole system a bit too bargain-basement to benefit from a decent DAC?

Words of wisdom gratefully received.
spartane5c
nikturner920
144 posts
 
I would recommend you try a Monarchy audio 24/96 upsampler. Really improved my MSB. Plus, since I think your cd player is toslink only the monarchy upsampler will jitter reduce and allow you to use coax into the MSB. If you buy through them I think you get a decent cable as well. You may also want to try some cheaper Harmonic Technology cables from dac into the amp.

My most important advice though is that if after trying some things you still don't hear a difference don't feel bad about downsizing and buying more music.

NIK
audioengr
3,282 posts
 
Tarsando - this is the impression one gets when listening to stock components, particularly mid-priced such as those you have, although some do sound a bit better than others. Modifications however make a HUGE difference. This makes these sound like real music. Mkae sure you pick the RIGHT modder.
spartane5c OP
3 posts
 
Thanks for all responses so far. It sounds as if I should start with the transport and/or interconnect between the transport and DAC.

This raises an interesting question: is it really worth getting the an inexpensive player like the Sony XE-500 modded?

This was Sony's least expensive single-disc CDP when new in 98/99 (retailing for $180). It was reckoned by one reviewer to make "a respectable entry-level transport" when mated with an outboard DAC. But, even so, it is five years old, supports only Toslink and coaxial line-out, and cost me $35 used!

Surely I'd be better off investing the cost of mods in a better transport? Or selling the MSB DAC and investing the proceeds (plus a bit more, maybe $500 in total) in a nicer stand-alone CDP?

Please feel free to chip into this thread if you've not already done so. I've never had a component modded - so I need all the advice I can get.
Post removed 
kjg
171 posts
 
My 2 cents. Ez2Hear is correct in his suggestion of introducing a better cable into the system. I tried cheap RS audio cables between my DAC and transport and the sound was absolutely dreadful. I assembled a good quality 75 ohm cable from Belden 1505a video coax along with proper 75 ohm connectors from Canare and the sound improved dramatically. The parts cost on this type of cable system is very low if you want to build one yourself, or you can try one of the inexpensive cable makers such as Blue Jeans Cable to purchase something pre-assembled. I think that you'll find the difference in sound when using a reasonable cable will be striking.
More to discover