Go with a tube preamp or not?


Hello everyone, I am interested in purchasing a tube preamp for my system. I am considering replacing the Classe CP 60 I am currently using and am looking for recommendations. The rest of my system is a Denon 3910 with Upgrade Company signature mods, a pair of Aragon Palladium 2 monos also upgraded by Upgrade Company, a pair of Intuitive Design Summits with Path stands and a total of 6 Stillpoints per side. I use a Velodyne DD12 to augment the low end. Cabling is mostly Ridge Street Audio with one pair of Jungson Golden Dragons used between the pre and power amps. the room is about 13.5 by 17.5 with 8 foot ceilings. I listen to a wide range of music including pop, classic rock, heavy metal, contemporary jazz, blues, and funk. Normal listening volume is 80 to 85 db's but occasionally will listen in the range of 90 to 95 db's if the mood strikes me.

I recently got to hear another member's system that has the Summits and uses a very nice tube preamp. I would like to see if I could get some of that tube sound in my system. I am not looking to drastically change the sound of my system, rather just add a touch of warmth. I have no experience with tube gear, so I am looking for help. I have looked at past threads, but am not finding specific enough info.

There are a couple of requirements that I am looking for and a couple of others that would be nice but are not mandatory. First, I want the unit to be remote controlled. It needs to have both balanced and single ended outputs that are active at all times. (My amps are balanced and I am not looking to change them at this time. The amps also have a 44 kohm input impedance.) Home theater pass thru would be nice, but is not mandatory. Same thing for phono capabilities. I am looking in the $1500 range used but could go as high as $2k if the right deal came along. I am not going above the 2k mark. I would need to sell the Classe pre first.

I have looked a little, and offerings from BAT, Audio Research and Conrad Johnson have all gotten my interest. I am sure there are plenty of others that I haven't mentioned. What I don't want to lose that the Classe does well is pacing and dynamic contrast. Any input is appreciated.
csmgolf
Csmgolf:

Three HUGE disclaimers prior to saying ANYTHING:

1) I have NEVER heard or even SEEN this preamp, so I know absolutely nothing about it other than that it's offered by Klaus Bunge, it's tube and it's in your price range, NEW.

2) I do NOT know whether it can be made (or whether he'd be willing and/or able to make it) in a balanced configuration.

3) The impedance stuff is over my head, at least at this time.

So, why on EARTH do I have the AUDACITY to even CONSIDER making a tentative suggestion???????????????????

Two words: Track record*

Klaus is legendary for making high end products and offering them at affordable price points**. His products are well known to be huge bang for the buck quality. So, knowing very little and with a relatively modest (modest in audiophile terms, that is....LOL) price point of ~$2K in mind, might I humbly suggest your consideration for auditioning of the Odyssey Candela Tube Preamplifier?

*Klaus Bunge's track record, not mine!
**I met him at the 2007 RMAF and suggested that he might consider manufacturing jumper cables, and that he could call them the "Bunge Jumpers." He was polite but clearly uninterested in this idea.......
p.s. As you probably already know, I drive my Summits with an Odyssey Tempest Extreme solid state preamp and two Odyssey Stratos Extreme Monoblock amplifiers.

Hmmmm, the Candela may be a consideration for ME as well--at some point. Anyway, talk to Klaus directly, and he'll give you good info about his products. He MAY be a teensy weensy bit biased, but overall my impression (FWIW) is that he's admirably honest.

Bill
Hello John-I was wondering what your point of view was on the arc ls16mk2 as I just obtained one and am driving a pair of audio valve challanger 180 mono's hooked to my soundlab m2's;also any advice on the 6h30 tubes in this unit?
So far I am pretty impressed this is my first tube pre amp having just sold a Klyne 6lx3p pre amp I had for several years.
I do like the home theater bypass loop also.
Hello Rleff, to be honest, I've never heard the LS16 mk II. I have heard the LS16 mk I in my friends system with Krell amp and Dynaudio Contour 3.4 speakers and was pretty impressed. Overall though, I was not much of a fan of the older ARC preamps before the ARC Ref 3, which is still the best preamp I have ever owned. Yes, I know it cost a lot more, but IMHO ARC made a big jump with that series. Personally, with the older tube preamps, I prefer the VAC, BAT and Cary, though not necessarily in that order.

As for the 6H30 tube, it is very rugged and reliable, but there is not much to do in the way of tube rolling. This may be a good thing for someone just changing over from SS preamps though, as tube rolling can be time consuming and expensive. Yes, they do make what are called NOS 6H30 tubes, from the 80's and 90's, but IMHO the difference is not worth some of the ridiculous prices that I've seen being charged for them ($200-$300/tube). I've seen 6DJ8 variant's, 12AX7's and 12AU7's also selling for crazy prices, but IME I've heard more differences between these NOS tubes and current stock than I have between NOS 6H30's and current stock.

As a general rule (of course there are exceptions), I would say the 6H30 is rugged, reliable, powerful and dynamic. The old scholl preamp tubes (6DJ8, 12AX7, 12AU7) tend to have less of the above traits, but have better air, resolution and articulation, again IMHO, IMS.

Cheers,
John
Thanks John for some good feedback;I saw you listed the 12ax7 and 12au7;my amps have 6189 and 12ax7 in them;would your comments also apply when these are used in the amps?
I have been a tube owner for several years but never really played with rolling except for output tubes as these amps will autobias el34,6550 and kt88's so I am familiar with them but not the input tubes listed.
Any other tube owners chim if you have some opinion as well.
Csmgolf- if you think I am highjacking the thread let me know and I will start one of my own.