Good Matching Cartridge For Micro Seiki 505


I am looking for a really good matching cartridge for this 505 tonearm, output must be at least 1.0mv???
jsman
There's no such thing as a universal pickup arm. An arm must be matched to a cartridge that's suitable to the arm's mass.

You're welcome to live your audio life by this spurious maxim but I would have missed out on dozens of glorious arm/cartridge combinations had I not discovered the error of this 'myth' 😎
I bought a bigger after-market counterweight on eBay though...

Oh yes...I forgot about this. The limiting factor with the MA-505 is that its counterweight is undersized for heavy cartridges. I bought an additional weight for just such events although I rarely used it due to mainly running MM cartridges.
halcro
I would have missed out on dozens of glorious arm/cartridge combinations had I not discovered the error of this 'myth'
It's easier to get away with a mismatched arm and cartridge on a system that isn't full range, and of course many systems can't play the lowest octaves. But as for arm/cartridge matching being a "myth," you can only believe that if you believe physics and geometry are also myths.

Post removed 
Let’s do the physics then. Since I don't know the effective mass of the MA505, let's take Halcro’s FR64s, which I believe has 20g effective mass. Then add an 8g headshell (e.g., Yamamoto boxwood), where most of the mass is quite far from the stylus and hence let’s guesstimate its contribution to the effective mass to be 6g. Then add a 6g cartridge like A&R P77, where again most of the mass is well towards the pivot and not right at the stylus, so we guesstimate its contribution to be about 5g. So now we’re at 31g total effective mass. Compliance is 20 and thus the resonance is 6.4Hz, which is fine. Even if we took the headshell & cartridge at full weight, we’d be at 6.1Hz, which is also fine. If you have a stable turntable & non-warped record, this should play fine.

Now switch a Koetsu Rosewood into the same headshell. Its weight is 9g and we can again guesstimate the contribution to be a bit lower at 7.5g, say. The compliance is 5 and thus the resonance is 12.5Hz, which is fine. Again, even if we take the headshell & cartridge at full weight, we’d be at 11.7Hz, which is again fine.