Ground Loop?

Since you mentioned two dedicated circuits, are you using isolated ground receptacles? If so, check the ground wires. Remember, an isolated ground requires an insulated ground wire. You should not use Romex. The ground wire is not insulated. I’m not an electrician but when I installed a new receptacle for my system. Based on my readings, an isolated ground has different grounding specs. In my case, I could not use an audio grade receptacle like PS Audio or any other brand that required an insulated ground wire for an isolated ground. I ended up using a Hubbell 8300 hospital grade receptacle. Hope this helps.

I tried with only the 2 pieces hooked up, nothing else just the Moon 350P preamp and the JC3 Jr phono preamp plugged directly into the dedicated 20 A line. Using 4 different pair of balanced or unbalanced connectors makes no difference. I hated doing this with full intention of returning it, but I ordered a less expensive MM/MC preamp, and it does the same thing too. It's like I'm cursed on vinyl playback.

I have 2 pr. of Cryo-treated watt gate receptacles wired direct to fuse box. It never had this problem before it just kind of creeped in slowly and it can be heard in segways and quiet portions of the music. 

Do your wattgate receptacles have an isolated ground? If so, check the specs. Call their tech support. Most, if not all, isolated ground receptacles will require an insulated ground wire. If this is the case and you are using standard Romex, your ground is compromised. 

Thanks for the info. When the outlets were installed, I used in wall 20 gage AQ power wires. I've lifted the ground on both and individually with adapters. I even had the 350P or the JC3 Jr hooked up to a regular outlet, 2 completely different lines and lifted the ground on 1 or both in different configurations. 1 using the dedicated line and a standard wall outlet So, it's not the outlets. Still there, but again when I reach back on the JC3 Jr and when I touch the loading pot and only the pot it goes away. When I do touch the pot, the noise slowly fades away. I've been in touch with David and Jason at Parasound via email, and they stopped communicating with me and won't answer any questions or offer any kind of help.