2. amps-preamps
  3. 1289072642

Help on ancient Audionics CC-2s

Hi folks. I'm a fringe dabbler in audio---now stick to mostly entry-level, as I got cured of my audio addiction after working with Keith Yates Audio and Levinson gear in the 80s, discovering I would never stop, stop, spending or experimenting, so I quit, cold turkey. Yikes.
However, I recently picked up two of my favorite blasts from amp pasts,
Audionics CC-2s for about 99 bucks each, plus shipping, plus whatever repairs/ mods I need. Want to run them in a bi-amping situation. I'm not audio e.e. savvy to do myself---but have an excellent repair shop in my town with folks hip to Audionics, complete schematics, etc. Amps work (one output transistor replaced) but may want new caps. Any suggestions? Black Gates? Thanks much!
professor50
mrdecibel
3,063 posts
 
I owned CC2s. Someone above mentioned darkness to the sound, which describes many amplifiers from the past. When I purchased, originally for kicks, the Nuforce STA 200 in early 2017, I began selling many amplifiers from my collection. I am in no way saying this amp is the best, but it did, better many 20 plus year old amplifiers in my collection. The storage caps, ime, would not be the only parts, needing to be replaced, to get them to sound more open, and competitive, with other modern designs. Again, this is my opinion, and my experience. Enjoy ! MrD.
buzzer
1 posts
 
I have a CC2 that I would like to refurbish with new caps.  any current information out there or recommendations from you guys.  Thanks.  
albs's avatar
albs
1 posts
 
I have the manual on how to run them in mono bridge if you’re still interested.
tomic601's avatar
tomic601
12,911 posts
 
I have my old friend, bone stock CC-2 running the Totems in our sunroom. One if not the first low TIM amps….
radesignz
4 posts
 

I just (6-13-23) picked up a second CC-2 on eBay for $70 to my door, and found bridging instructions somewhere online but can not find that source now. For each speaker of a 2 channel system you connect the + speaker wire to positive terminal of Channel A on the amp and the - cable to the negative terminal of Channel B. (this necessitates stripping the pos. and neg. cable wires back a good 8 to 10" to reach opposite corners of the CC-2 for each speaker. Then use the Channel A RCA input for that Channel from the preamp. This means both amps are connected exactly alike with the only difference being that one pair of leads is from the left speaker and the other is from the right speaker. I hope this helps. BTW, I  completely love these amps bridged, both driving my Martin Logon EM ESL's  Bob

More to discover