help with din to rca cable for creek amp?

If you do a search here on the 'Gon or on eBay, you might come across Chord 5-pin DIN to RCA connectors. They usually go for around 50 to 100 bucks, depending on vintage. Alternatively, you could have your favorite set of interconnects terminated in a DIN, although I have no idea how much that might cost.

I think Naim gear uses 5 pin din plugs. You could check to see if a Naim dealer has any cables in stock with RCA on one end.

I have a like-new set of inexpensive cables that are 5 pin din and RCA. They are for a tape deck (4 RCA plugs). The two RCA plugs that are for the input would work with anything I would guess. If you want to try them or if you'd like to try connecting a tape deck to your Creek, send me $10 and I'll ship them to you.

You can either go with Sugarbrie's offer, either pick a cable of your choosing and if it doesn't work, try to modify it. DIN cables were meant (among other things) to be used as a single link between say a tape deck and another. There are 5 pins on the connector; the one in the middle (say no. 3) is the ground, which is common for both input and output. The reason for your cable not working is probably that you need pins 1&2 to be active, while the cable has only 4&5 connected, or vice-versa. (if it's not a "double" cable the other two pins are probably empty). If you're good with a soldering iron, you can customize just about any cable you like to suit your needs - but you'll have to "destroy" one end and add your new connector. Hope this helps.