HiFi tuning fuses, some benefits help


OK I admit that I'm not sure of the technical benefits of HIFi tuning fuses but... some extra help would be great to help me understand. First off how does it change the before and after sound of the peice you use it in? Like does it make it warmer, cooler, more nuteral? If "gon members can help to distill this for me it would be a help. Thanks in advance.
rsjm80
I concur Rodman,as one who has cleaned up the power from the panel to the gear,the more you do the better it gets.
Why spoil it for the sake of saving a few dollars?
One approach to panel noise and A/C noise in general is to look at Alan Maher"s CBI filters. They attach to the main incoming wires to the breaker box and to the ground wire. They are quite effective at improving the A/C that goes to the in wall duplex outlets. take a look at Alanmaherdesigns.com
Good listening.
David Pritchard
What I meant by cleaning up the power from the panel is that the single best thing to do is use a dedicated line to your gear using a 20 or 30 amp breaker and 10 guage wiring.
Everything after that is icing on the cake.
I am intrigued with the reference to the alanmaher product and will investigate.
I've spent years running around in circles flitting from one component to the next looking for sonic nirvana.
I have let go of some fine gear that I never really heard how good it was because I never ventured into cleaning up the power to the gear.
My most recent and pleasant experience has been the addition of a Python CX power cord to my shunyata snakepit.
It has upped the pleasure factor, my Audio Aero has never sounded this good with any other power cord that I had at hand.
As far as audiophile fuses go, I have only tried the Hifi-tuning gold ends version. They made a very substantial improvement in both my tube monoblocks and my tube preamp. However, in my system and IMHO, these fuses take a while to fully flesh out. The first couple of hours they sounded very sparkly and nice. The next three days it sounded like a blanket was placed over my speakers. At this point, I almost took them out, but I hung in there and on day four, the blanket was removed and the sound continued to improve thereafter for up to 300 hours. I know. Call me anal. (o: Here is the best price I have found on these fuses:



http://store.acousticsounds.com/d/41414/HiFi-Tuning-Fuse_-_Large-System_Enhancements



Here is a link to some lab tests comparing some popular fuses:



http://www.partsconnexion.com/prod_pdf/hft_facts.pdf