Home made cable lifters.

I had been thinking of building the tripod as suggested above. However, instead of sitting the cable directly on the wood, I had thought of connecting a piece of teflon tape across the top of two of the legs. Sit the cable on the teflon tape.

Teflon generally is considered a great dielectric and in this case the cable will only be in contact with the teflon tape. Should provide an almost perfect isolation from vibration and electrical influences. Of course, this is all theory so YMMV.

Enjoy,

TIC

furniture foam cut in pieces may have a dampening effect.

i also may use larger pieces under components as well.

>> For the absolute best cable/floor isolation, take fishing line and suspend them from the ceiling...You might start with a good clear monofilament or fluorocarbon line at 10lb test...Then try different line strengths and colors, and heights off the floor to get the best sound. Clear tends to sound the most transparent, and saturated colors sound darker.<<

Boy, I bet that's a very attractive setup. And who would have thought that clear line has a "transparent" sound and colored lines "sound darker"? Talk about LOL!

I appreciate all the laughs you guys provide, but sometimes you need to read the stuff you write - it is ludicrous, at best.

-RW-

Be careful when you construct your own cable lifters. One of the reasons people use them is to lift cables off the carpet to negate the effect of plastics and other artificial fibers in the carpet. Using plastics and foam in a lifter adds back in what you are trying to remove. If your room is hardwood flooring, or your cable runs travel over natural fiber and vegetable dye carpet, you don't have the problem to start with. Teflon, ceramic, glass, natural wood, carbon fiber -good. Plastic bad.

That being said, there are other reasons than those stated above that people use lifters, including aesthetics.

Slipknot, yes I`ll be dealing with, I assume, artificial fibered carpet over concrete. I think the best set up would be porcelain insulators boosted on 4" blocks for height. Now then, if I can only find some old insulators....