2. analog
  3. 177351-1662

How best to eliminate LP warps

I own about 2500 LPs, and I like to think they're flat.  Furthermore, I espoused the view that warped LPs ought to be discarded.  But lately I have found 2 or 3 of my LPs that do have warps but sound too good and are too precious for the music recorded on them to throw away.  So I am in the market for ideas on how to remove warps.  I am aware that there was a device on the market that looked like a large waffle maker, to be used for warp removal.  I think Furutech made it, but I never see it advertised these days.  I am also aware of the DIY method of placing an LP between two glass plates and heating the ensemble.  The question there would be how hot and for how long?  Any suggestions are welcome, especially opinions on the efficacy of the Furutech.  Thanks.  Please no comments on vacuum hold down; I think it's a great idea but none of my five turntables has that feature.

lewm
lewm OP
13,106 posts
 

petgo, I guess the only clue an end user would have that a cartridge is internally misaligned would be if he attempts to set azimuth electrically (equal crosstalk in each channel) and this result requires tilting the cartridge in either direction from a 90 degree orientation of the stylus tip to the groove walls. By that criterion, most cartridges are not perfect, but they are not far off, either.

dhite71
331 posts
 

I have used the Vinyl Flat for several years.  Initially I would borrow from a friend that has one about 10+ years old.  I believe that pouch only had low and high.  I would use the high, regardless, for about 3 hours and worked well.  I eventually decided to get my own and the high setting for 3 hours melted the grooves.  It was pretty wild and thankfully nothing special.  I went to medium for about 2 hours and eventually found the sweet spot of medium for 3.5 hours.  

My experience is that this works well for new vinyl.  Any of my collection of older vinyl I have not had any success.  I don't have as much of a problem with older vinyl so there's that.  

Pressing plants basically suck for new vinyl as it can be so awful right out of the sleeve on new releases.  I used to return them to amazon but got tired of the fight as the replacement was often the same.  Now on new vinyl if it is warped at all, it goes right in the Vinyl Flat for the 3.5 hours and is all good.

lewm OP
13,106 posts
 

I recently bought a second copy of the Cardas test LP. I’ve been using it for years to warm up cartridges that either need break in or have been out of use for long periods, which happens when you own 5 turntables and 2 systems. Anyway, the new copy was very badly warped right out of the sleeve. I of course immediately returned it to MICHAEL PERCY audio, and he replaced it immediately, no questions asked. Still, it is surprising to me that Cardas could let such a thing go out the door as a test LP, of all things.

juke4u's avatar
juke4u
50 posts
 

I have thousands of 45 RPM records. I got 2 1/4 inch thick pieces of glass made with the center cut out for the label. I put the 45 between the glass, taped the glass together, and sat it on top of light bulb. (about 6" from bulb) I would give it 30 minutes and take it off and let it cool. It only failed a few times on the very thin reproduction 45 records. It should work on an LP.

In my audio system I have a Sota vacuum turntable and must say it works great. Basis make one that work great also.

jazzguy43
39 posts
 

Friend,

No! No! No1 The physics will not work for you. Once a round object is warped it is really not round w/an eccentricity of 1.0! Nothing you do will ever bring the eccentricity back to 1.0! In essence you will now have an ellipse and your lp is not round. Watch the tonearm swing and make your lp sound on the weird side. Benn there, done that! Also, too much pressure w/heat = NO MORE GROOVEs!!!!

More to discover