How to improve my system : Shunyata Hydra ?


Hello,
I hope someone can give me a few hints or things to consider !
My system consists of Krell KAV-300iL, cd player Cary 306/200, speakers Avalon Opus Ceramique and the cabling is entirely from NBS Omega I (interconnect and speaker cable) except for powerchords, which are NBS Monitor IV with Furutech rhodium plugs.
The speaker cable is new and replaces the Nordost Valhalla I had previously. The Valhalla was nice, but I had the impression that it was - to borrow a comment from someone else - a "bass thief". So I decided to buy the NBS without having the chance to audition it. It has got now roughly 150-200 hours, but it is nowhere near compared to the detail and imaging provided by the Valhalla. And the Valhalla were louder, perhaps due to the low impedance. I spoke with NBS and they were surprised. Is the mating with the Krell so bad ? My question is how long should I wait for the NBS to open up or what is causing the problems ?
I'm wondering if getting a power conditioner such as Hydra-6 + Python Alpha or Hydra-8 + Python is going to help me. Should I take the plunge and buy Shunyata's Hydra or not ?If yes, what model (Hydra-6 or 8) would work best with my set-up (I don't need more than 6 outlets) ? Unfortunately I cannot audition the Shunyata... Any recommendation or ideas ?
cheers and thank you for any comments which might help me to overcome a bit my frustration.
Mike
mikefi
Tha valhalla is not a bass thief, but like anything it requires some system matching. The valhalla is very airy and detailed, but is certainly not the king when it comes to dynamics. You may want to try harmonix interconnects. They are monsterouly dynaamic, very detailed, but you will most likely loose a little air. Buy them used, and if you don't like them you can alwasy resell them. I have also owned a Hydra. It will not provide you with better dynamics. It will perhaps drop the noise floor of your system and provide a slight liquidity and ease when can be quite present. For dynamics, I prefer to not use power conditioning and use good power cords.
First of all sell Krell and buy Plinius 9200. You won't need any further upgrades.

Rgds
First and foremost you
might think of upgrading to a dedicated BX wiring that is shielded and used for dryers(in the normal world). Also using cryoed breakers and outlets makes a huge difference to a ss amp that is able to draw 20 amps. The question concerning the cable break in should be at least 200hours before you judge and possilbly 400 hours depending on the cable. I would do the power update before I considered any other change to the system. I also would only buy products that have a return policy if you can't audition before you buy. Power is a fundemental that shouldn't be ignored -Dennis
Hello all
thank you all for your replies. I'm aware my mail is not the easiest to tackle and can be truly confusing at times.

First, why did I change to NBS ? I heard a system entirely on NBS Monitor III with Pass and Avalon Opus Ceramique and it was just magic. As for my set-up, the Valhalla speaker cable was great, but I had the impression that "body" was missing, it was thin at times. But then it was very detailed, louder and had very good imaging. I was told that NBS Omega I would top the Valhalla in every aspect, better imaging, more body, so I took my chances and went for a new 10 ft NBS Omega I.

Browsing the other answers, I guess your two replies are the ones that I'll have to contemplate; as for the other replies, I already have a dedicated power line, so a first important step was taken, but I think Shunyata could improve things further while helping out with my real issue. Given the various Hydras they sell, one of my questions was which model would be best for me.

What should I do ? I guess I'll have to first talk to NBS as my interconnect is their brand they sell to Central Europe ("NBS Active"), which should be the same as Omega line (?), and the speaker cable I bought directly from a certified NBS dealer in the US. I just want to rule out any "compatibility issue" between the NBS cables, although I would be very surprised !!! Once that is ruled out, the answer could well be yours, Jkuc, to ditch the amplifier as the mating of amp/speaker cable/speaker might be the answer. As NBS works well with Avalon, the answer must be the amplifier, right ?

cheers
Mike
If you heard a similiar system to yours though in a different room, I don't think the differences you heard were a result cables. To many other variables.

steve