Is DEQX a game changer?

^Joseph Audio describes their somewhat unusual cross-overs as: "infinite slope".

Bruce: I think Bombaywalla and Al have answered your question very well, DEQX corrects exactly what it hears but, as you also suggested, it is still a function of crossover, driver design and build quality, plus 'voicing' of the cabinet as well

DEQX deals with distortion as long as the user is not trying to push a particular driver beyond what it is capable of or trying to over-compensate in the software. For instance, good as it is, DEQX is unlikely to provide distortion free 10hz bass from a 4" driver! When calibrating, the user must work intelligently with the measurement plots

I can report from experience with 3 very different sets of speakers that the results sound surprisingly similar in the same room. In the case of the first two, very significantly improved over the same setups used previously without DEQX and in a similar setup to the one that Bruce has. The third, my current and final configuration now uses everything an HDP processor has to offer (6 way) except the DAC

1. Shahinian Obelisks including passive inbuilt crossover driven by one amp + one M&K sub (<120hz)
2. JBL stand mounts including passive inbuilt crossover driven by one amp + two M&K subs (<110hz)
3. Open baffle floorstanders, bi amped with two amps, treble crossed at 3100khz + one M&K and one B&W sub (<100hz)

Smooth frequency response, clean, tight bass and musical clarity were very similar among all three setups. If there was a shared character, I would have to call it 'transparent and neutral'

The Shaninians, probably by nature of their multiple 360 degree radiating mid & treble drivers had the poorest imaging and a more indstinct soundstage but with huge width and depth. Still fabulous sounding though

The JBL setup imaged extremely well and had the sense of a neat but smaller 3D soundstage and encouraged me to then move on to, what I consider one of DEQX-HDPs greatest strengths - the ability to incorporate multiple amps and steep crossovers

When not listening to my home system (or with my wife!), I am normally with like minded friends listening to live music and realistic transient attack had always been my goal because that is one area I had never been able to resolve, no matter what I listened to in dealers, at shows etc - until I heard another, OB based system with a DEQX processor in it. To achieve the necessary midrange speed/cleanness I decided that I wanted to avoid any sort of cabinet colouration so started researching Open Baffle Speakers myself

I prototyped various designs for a long time before commissioning a CNC workshop to manufacture the frames for my final design: 1" thick Zebrano Bamboo floorstanders with a d'Appolito configuration of Aluminium/Magnesium midrange drivers and ribbon tweeters. Large, heavy speakers but exceptional transient speed with a real sense of musical reality...in fact unbelievably so on a lot of recordings

One other comment about DEQX correcting 'what it hears' - I do have experience of comparing music corrected from an in-room and outdoor measurement of both the Shaninians and JBLs and although in theory the software should correct to the same resulting sound, it does not. My in-room measurements always resulted in a slightly unnatural, nasal hollowness to music playback and with my desire to achieve 'perfection' it wasn't quite good enough

Thanks Andrew. Based on the collective comments coming in from you and Bombaywalla, I am thinking that I am at a "stop point" with speaker evolution. If there is a next step, it may be an off the beaten track approach that Andrew has taken.

Btw Andrew, if I correctly understand your custom design, your drivers are mounted in an open baffle frame. What is your experience with back reflection from the drivers? Any wave interference and cancelation effects? Many manufactures try to damp the back reflections in damped sealed structures (e.g., Paradigm and Magico) or use a transmission line approach (e.g., Vandersteen).

Also, many manufacturers like Revel design the front baffle to minimize wave inference effects. How does your design speak to front baffle interference issues?

Back to my original point, ... I am interested in reading about Al's set up experience with the sound box. As previously posted, it is not physically possible for me to move my speakers outside for an "anechoic-type" set up. Nevertheless, perhaps Al's sound box experience will persuade me that I can approach that goal.

P.S. Although I have reported this before, I believe that the DEQX PreMate has been a high yield investment in my rig. I am dubious that dropping $30K Magicos ("sans" DEQX) into my rig would yield a lot of grins if the music doesn't "sound" quite right because of time alignment issues, or if the room twists the FR of each speaker into a pretzel.

Thanks again guys.

Bruce

Thanks again Bifwynne. Glad I was able to contribute.
Very good responses from Almarg & Drewan77 esp. his feedback from personal usage over the past 3 yrs. I've also heard Magicos sometime back & agree with Almarg's findings.

Agree with Unsound - the Joseph Audio slopes are called "infinite slope". yes, they sure appear to be brickwall filters. He often gets a best of show award & I've heard his speakers - good sound but they never stood out.

Bifwynne, it looks like you've convinced yourself that your Paradigms are at the end of the line now. Only you can tell this & we take your word for it. If you try open baffle speakers, there are a few commercially available - Emerald Physics & DIY kits from Siegfried Linkwitz of Linkwitz-Riley fame. Maybe you want to order his kit & make it yourself?? This might be another option (other than building Drewan77's design)??
At RMAF2007 Nelson Pass was there himself in one of the rooms showing off his open-baffle speaker driven by one of his First Watt amps. It was quite experimental at that time but maybe that design is mature now & ready for ordering as a DIY kit?
Thanks.

Hi Bruce, my OBs only handle 100hz and upwards - each using four mid range drivers plus ribbon tweeters. All these are physically aligned (to the originating point of each) within a flat, tall and wide baffle & the speakers also have shallow tapering 'sides' which blend to the top edge. Sound waves can pass across the front surface and away to the sides but are constrained so they also transmit (only) to the rear. Nothing else behind the speakers apart from cabling and a single protective capacitor for each tweeter

There is free space beside and behind the speakers and I have no obvious issue with back reflections or wave effects/cancellations - but that's not to say they aren't there, it's just not apparent and I have no reason to check. The music room also has a lot of diffusing and absorbing material including a great deal of vinyl (+ CD storage)

In everything I have done, listening and then adapting has been the mantra until I achieve the sound I want - this has always been referenced to natural sounding live music. Research, theory and specifications are extremely useful but the real question should be 'what does music actually sound like'?

Sure, I made mistakes and I produced multiple low cost OB prototypes - each time I heard something I wasn't happy with, I then researched that particular aspect and adapted until it sounded right. My original intention was to try out OBs, learn and then build a pair of Linkwitz-Rileys but my own developments started to sound so good that I saw no need to follow that path. Maybe I just hit lucky or it's probably more likely that DEQX is capable of fully correcting something that is nearly there already?

I am confident that in my room and with my (mostly analogue source) preferences, this system is about as good as I could hope for

I have done nothing more to my setup for at least 2 years and can find no fault (so far). For the previous 40 odd years I constantly replaced and upgraded.... 'chasing the wind' as it were. Not any more and that's why I am very happy to see Bruce, Al and others starting on the same path because I know that the end point can be so satisfying