2. amps-preamps
  3. 1221240676

Jeff Rowland 501s and PC1s

I installed the PC1s with my 2 Yr. old 501s and am very happy with the improvement. Sound stage is wider, taller and deeper. Image is more pronounced with increased detail.

As for value, $3200 for the PC1s on top of $6700 for the 501s is alot of money. A lot of very good amps at this price piont.

For me, Rowland equipment has a very natural, uncolored sound that I have found compatable with all my other equipment over many years.

System:
Esoteric X0-1 Limited
JRDG Concerto Pre
JRDG 501s
JRDG PC-1s
B&W 802Ds
Cardas Golden Reference, all cords, cables and ICs
ASC Tube Traps
Room Dem. 13'x 15' x 9'Hi
phous
guidocorona
4,298 posts
 
Clavil, how did you use the PC1s without the JRDG original wires to connect them with the 501s? You seem to have received the PC1 to amp wires just a couple of days ago. G.
clavil
254 posts
 
Guido,

My dealer gave me both PC 1 for home demo with modified NBS Monitor II power cables, I only got the original JRDG cables yesterday ... he was right!
guidocorona
4,298 posts
 
Hi Clavil, just trying to understand. . . you were using NBS power cables instead of JRDG 'pigtails' between PC1s and 501s, and you experienced that the modified NBS power cords yielded a more desirable sound for the 501s. If my description is correct, I expected your results. . . the JRDG 'pigtails' are just stock wires, and as such they are unlikely to be at the level of any high end aftermarket power cords. Guido
clavil
254 posts
 
Hi Guido,

I got the 501s with the Capri together (power cables AET EVO Hin from the first day),
than I had one PC1 on the Capri (power cable between these two NBS Monitor II from the first day),
later I got a second PC1 and I put them on the 501 with two Monitor II,
I had never seen the JRDG original powercables for the PC1 until I wrote here, I asked for them to hear the difference with the Monitor II ... that said the european JRDG cable is not a Pigtail ...

I hope now it's a more clear ... sorry for my english
guidocorona
4,298 posts
 
Clavil, the JRDG cord that connects PC1 with an amp is a 45cm long power cord. It has a male 15A IEC at one end to connect to an amp, and an IEC 320 connector at the other end to connect to the PC1. Such a very short cord is often referred to colloquially as a 'pigtail', even though it is straight and not coiled like the real tail of a cochon. Is the PC1-to-amp cable supplied to you any different? Guido
More to discover