Just received my new Luxman CL-1000 pre-amp.


Took the plunge and went for Luxman’s new flagship CL-1000 pre-amp. My preceding unit was the c900u and it’s as good everyone says. So what are my initial thoughts on the CL-1000 with less 20 hours on it: pure path into the music with a naturism only one who hears it will be able to understand how good it’s. Startling when the music matches its powers of emotion it can deliver on voices, drums and every instrument the recording has to offer. As good as the C900u is the CL-1000 is clearly a big step up! Only two complaints: no remote ( they didn’t want anything to interfere with their new SOTA
volume control) and no mute button. I can live with these minor inconveniences considering what it brings to the table. I’m not a dealer or associate with Luxman in anyway. I’ll keep posted updates on the unit once it has been fully broke in.
hiendmmoe
I have been thinking about purchasing the C 900-u for my second system. This has been an interesting read. I looked at the CL 1000 and passed, not because of the lack of remote control. I at one time owned Tube Research Labs gear and my GT 200 preamp was of the non-remote type. My issue is the TVC’s (transformer volume controls).
I’m aware that many believe they are more sonically transparent than resistor arrays. I owned the Music First Audio Reference TVC and liked it so much I also purchased, directly from MFA, the Baby Reference that Sam Tellig reviewed claiming “I have not heard a better preamp, and I’ve been looking for more than 30 years.”. My issue was that after building a custom tubed preamp with resistor based volume control (albeit an insane resistor based volume control) I found the TVC’s to obfuscate minutiae in the music. TVC’s can sound incredible as they have an innate ability to almost act like a sonic expander on the music but my experience has been that they will hide that last little bit of information (miles of wire, hysteresis).
After reading and re-reading the 6 Moons reviews on the original and then the upgraded Wyred4 Sound STP-SE series I decided to give it a try. All the information was there and the fullness of the TVC. I made the purchase and haven’t looked back.

I also own the Luxman EQ 500, along with the AMR PH 77 and an iPhono3 Black Label. The EQ 500 is better than most phono stages I’ve experienced and is dead quiet as in you wouldn’t know it was powered up.

highendmmoe:
Did you compare the EQ 500 side by side with the CL 1000’s phono stage in the same system? I have a hard time imagining any phonostage being “much quieter” than the EQ 500. Hard to imagine the built in stage could compete with the EQ 500 as I’ve found few that can including the ARC Ref 10 I just auditioned. I should mention that I have changed the awful JJ Electronics tubes in my EQ 500 for the Psvane Black Treasure MKII series tubes and the rectifier has been changed to a NOS Mullard along with 4 AMR MKII Gold fuses and one Audio Magic Ultra Bees Wax fuse. The difference in sound from stock tubes and fuses is massive! So we may be talking apples and oranges if you are running stock tubes/fuses.

Either way congratulations, I’m looking forward to getting the C900-u in for my second system. If it doesn’t beat the STP-SE Level 2, I will be adding a second Wyred4 Sound. 
Enjoy.
I own the MQ 300 and would love to get the CL 1000 as I think it’s a perfect match.
According to this thread:
https://www.audioaficionado.org/showthread.php?p=997830

The phono-stage in the CL-1000 is ported from the E-250, so I’m surprised it beats the EQ-500.

Congrats on your new get!
I just got my CL-1000 2 days ago and I have been listening to it with the MQ-300 driving Devore Super 9. I thought the difference with the CL- 38uSE was going to be subtle but it is actually very noticeable. Sound is richer more controlled and more detailed. I am using the phono section with a EMIA copper SUT.
The dac is TotalDac.