2. amps-preamps
  3. 149487-133274

Krell HTS 7.1 set up

Hi all,

Well after 15 or so years, I finally picked up a Krell HTS 7.1.

right away, I noticed that my mains don't have any bass, nada, no signal to the woofers.  I'm guessing that's a set up issue.  Also, I want to assign the toslink input to Aux1 and my turntable preamp to aux 2.

I'm assuming that you need the On screen menu to do this.

However, since my panny plasma isn't 15 years old.......How can I see the menu?  I also am in need of a remote to complete the set up process, I know there are after market remotes available, but don't want to order one until I figure out the menu issue.

Thanks for your 2¢

-W


waybro
waybro OP
13 posts
 
Thanks for the advice,  I picked up a composite to HDMI converter in anticipation of this issue arising,  It hasn't helped.

I've also seen those remotes.  I'd like the OEM but it's pretty steep at over $100.00.

I may have to look for an old TV on CL as an option.

Does it make sense that I'm not getting any bottom from my speakers?  Is the preamp default set to small speakers?

Thanks again

-W
waybro OP
13 posts
 
Hmmm,  I thought I ordered a composite to HDMI converter,  but what showed up was a CVBS to HDMI converter.

I'll look for the correct converter,  however, the Krell manual states that the OSD only works on interrelated screens, not progressive. I wonder if the converter would address that issue.
auxinput
2,920 posts
 
Sorry, I don't know the default configuration for the HTS (as far as speaker sizes and bass management, etc.).

The first or second generation DVD players used to be able to play video in "progressive mode".  This just meant that it output a 480p progressive signal instead of a 480i interlaced signal.  If the HTS is showing video from a 480p progressive movie/source, it will not allow the on-screen menu to come up.   If you do not have anything active connected to the video inputs, you should be fine because the HTS will output 480i by default.  The converter should be able to convert the 480i to HDMI and your Plasma should accept the 480i video just fine.

Make sure you connect the cable to the composite RCA output that has "OSD" printed next to it.  That's the only one that will work.

You will need a remote of some kind to being up the on-screen menu (by using the MENU button on the remote).  It is not accessible from the front panel of the unit.
waybro OP
13 posts
 
Thanks.

I'm now in alternate panic mode.  I swapped out my old pre/pro....

still no woofers on my Martin Logan SL3's.  I'm beginning to think they're blown.
waybro OP
13 posts
 
Make sure you connect the cable to the composite RCA output that has "OSD" printed next to it. That's the only one that will work.

You will need a remote of some kind to being up the on-screen menu (by using the MENU button on the remote). It is not accessible from the front panel of the unit.

That makes sense, as now I'm getting a blank, snowy screen.  The remote is on it's way......
More to discover