Learning about my room and my sound..

Eldartford, I think what you described could well be what I experienced. I was hand holding the meter.

Just some random related thoughts... I am in the process of tuning a listening room I put together, and the speakers are Quad 988's. With the radio shack meter, the frequency response is all over the board. A friend is sending me a spectrum analyzer. Has anyone compared a spectrum analyzer vs. the RS meter? If so, I'd be interested in any findings.

Also, I am looking for some advice. I believe I can set up a spectrum analyzer with my laptop. I've got an Edirol A/D converter that takes a microphone input, and outputs to USB. I've got a computer program that shows the spectrum on it. I think all I need is a decent microphone that has either a flat response or a response I can compensate for with my computer program. Anyone have any suggestions for such a microphone - something fairly flat but not too expensived?

Thanks, Peter

Chadnliz,

My room is similar in that one side opens to another room. I have found that I can almost balance this out by using absorption on the wall opposite to this opening. I can do whatever I like since my room is a dedicated finished basement. You may have to get creative with window coverings or something in order to kill the reflections from that near wall. Based on what I've experienced with balancing an unbalanced setup in this way, it will be well worth your efforts.

BTW, another good place to find out about this stuff is over on AA in the Rives forum.

Peter_s, I fdund this while browsing around.

http://www.behringer.com/ECM8000/index.cfm?lang=ENG

Peter_s...The Behringer mic is the one I use with my Behringer DEQ2496, and it is a good item..BUT...it requires a "phantom" power supply from the unit it is plugged in to. I don't think your computer does this.