The HF filter that capacitance of an interconnect that is 300pf for it's total length when with the Lightspeed is 76khz -3db
200pf is 114khz -3db
and for 100pf it is 227.5khz -3db.
As you can see even the 300pf is fine as it is still only -3db at 76khz.
This is why I recommend 100pf max per foot and the use of 1mt length with that maximum capacitance.
But most good quality interconnects are well below 100pf per foot which is even better.
This also applies to high output impedance tube preamps with their interconnects, especially when say a 30kohm output impedance preamp is used, if it has an interconnect with 300pf for it's length, it works out to be -3db at 17.5khz which cuts into the audio band quite severely.
Cheers George
200pf is 114khz -3db
and for 100pf it is 227.5khz -3db.
As you can see even the 300pf is fine as it is still only -3db at 76khz.
This is why I recommend 100pf max per foot and the use of 1mt length with that maximum capacitance.
But most good quality interconnects are well below 100pf per foot which is even better.
This also applies to high output impedance tube preamps with their interconnects, especially when say a 30kohm output impedance preamp is used, if it has an interconnect with 300pf for it's length, it works out to be -3db at 17.5khz which cuts into the audio band quite severely.
Cheers George