You just missed an 868L, which went for $2850 last week. A good companion for the 509’s, balanced/XLR outputs via transformers.
Linestage search
I´m looking for a linestage for my EAR 509´s monoblocks.
The input impedance of the 509´s is 25K
My first options are the following:
1. EAR 868 (used)
2. Coincident Statement Linestage (used)
I didn´t have the opportunity to hear any of them, so I would really appreciate advice on the choice.
Thank you all.
- ...
- 32 posts total
rafacampodonico They are high gain as they only need 1.2v for full output, most sources these days have over 2v, you should look for a low gain preamp, suggest a Schiit Freya. Which has 3 different output configurations tube, solid state, or passive, and it's remote control volume is about as good as you can get being 128 position relay switched controlled. And it's balanced or SE output with multiple inputs. http://www.schiit.com/products/freya Cheers George |
Manley Labs Jumbo Shrimp has 200ohm output impedance and should drive those 509's to perfection. This is a pre amp that will inject some real organic, rich tonal beauty with plenty of rise and decay, its a very special sound and you can buy them for around $2500 to $3500. Has radio controlled remote too not inferred.( RCA only if that's a big deal ) Also, pre amps are very important to the sound of the overall system, very important to find the one that sounds best for you, it would be good to try a few before making your mind up. Matt M |
- 32 posts total