looking to purchase AT6006 tonearm lift or similar

I'm going to try the Q'UP too, since my AT is starting to fail at times. Much better price and a more recent product. It's hard to tell how old AT's really are or how long a new one has sat in the box. The Q'UP's don't look as delicate either. Good luck.

My first Safety Raiser lasted 30yrs. When they wear out; they simply don't lift, or lift quickly(what mine did). Neither will damage an arm or cartridge. I suppose, if I manage to outlive the two I own now; I'll try the Q'UP. Having to use a piece of tape to lock it in place(per the instructions), seems a bit chessy though.

Regards, Rodman99999: No authority on the Q'up, it's my understanding that the auxiliary bases allow for broad matching of arm height, there are serations that couple the base and lifter body for smaller adj.'s. The tape is just added assurance that if the lifter is subjected to an outside force, it will be less likely to lose it's setting.

Do I know this for sure? Nope.

BTW, my "safety raiser" has a mind of it's own, I'm wondering if a drop of silicone fluid to the top of the cylinder might assist in damping the trip lever?

Peace,

Hello Mr T: Is your trip wire in contact with the tiny magnet(situated between the two wires), when your Raiser is locked down(ready for action), every time? If not; the slightest vibration can trigger it. I had to bend the trip wire(CCW) slightly on mine, to get it to trigger properly/consistantly. They can be somewhat frustrating to set up, at times. Once they are tuned in; they are a joy.

Regards, Rodman 5-9's: Operation a success, thanks for the tip.

Peace,