Thanks guys - honestly though - these are very well built and engineered speakers as is my DAC and amp and cables for that matter so to a degree they should work to a certain level?. I agree synergy wise and tweaking and getting to the sound one likes but this is different. I've owned many Wilson, Revel, Kharma, B&W and many others and used big Krell and BAT Class A amps and I know the SS slam sound. I get it - I've been thrown off by this synergy crisis though - I need to hook up a big - Phat, juicy tube pre and even if it's not the awnser just to hear what the result would be???
Magico S5 Speaker - SET UP ADVICE PLEASE - Tow-In - Etc.
Any Magico Owners or Dealers or Folks or anyone that may have some basic advice, ideas or feedback from hearing or seeing in a friends, dealers system or owned older version of Magico or something like or anything really that can help me? How are yours or theirs set up? The smallest moves makes huge changes and I am coming from speakers that are so very different so any and all feedback would so welcomed.
I CAN EMAIL YOU PICS of Room / Set up / Etc fsmthjack at YAH00
THANK YOU
BACKGROUND INFO:
ROOM: 24 x 14 with cathedral ceilings
MUSIC: Good mix - no hard metal / large orchestra and the like
LOUDNESS: normal levels - just loud enough to sound best
SPEAKERS Magico S5 Speakers
AMP: Pass Labs X350.5 Amp
SOURCE: Bricasti M1SE DAC
TRANSPORT: mircoRendu 1.4 w/Full suite of Uptone Audio products
CABLES HiDiamond Full Loom
CONDITIONER HiDiamond HDX2
SUBWOOFERS (2) Sumiko S.9 Subs (hoping not needed with new Magico's)
Thanks guys - I am kind of lost here and any help or feedback to get me heading in the right directions would be so appreciated.
I CAN EMAIL YOU PICS of Room / Set up / Etc fsmthjack at YAH00
THANK YOU
BACKGROUND INFO:
ROOM: 24 x 14 with cathedral ceilings
MUSIC: Good mix - no hard metal / large orchestra and the like
LOUDNESS: normal levels - just loud enough to sound best
SPEAKERS Magico S5 Speakers
AMP: Pass Labs X350.5 Amp
SOURCE: Bricasti M1SE DAC
TRANSPORT: mircoRendu 1.4 w/Full suite of Uptone Audio products
CABLES HiDiamond Full Loom
CONDITIONER HiDiamond HDX2
SUBWOOFERS (2) Sumiko S.9 Subs (hoping not needed with new Magico's)
Thanks guys - I am kind of lost here and any help or feedback to get me heading in the right directions would be so appreciated.
- ...
- 112 posts total
@fsmithjack Your Bricasti M1SE DAC has adjustable output. quote from manual " The next stage, at the analog out of the converter for the gain and filter sections there is a fully differential analog design with fast high slew rate analog operational amps. This is followed by 2 transistor designed output buffer sections, balanced and unbalanced, each separately buffered and isolated. The balanced output level as shipped is set with a fixed resistor at +13.5 dbm. For custom level matching, an internal the jumper on the board can be moved to engage a precision adjustable potentiometer. This adjustment is set from the rear panel screw near the XLR connector. When the potentiometer feature is engaged the level is adjustable from +8 to +23 dbm and can be referenced to a fraction of a db to match any setup. This level is set as a default +16 dbm at the factory so when the jumper is engaged this will be the new level. Please contact us for detailed instructions on how to change and set these levels. The unbalanced is set to normal hi fi levels of 2V RMS (+8dbm) by precision resistor values on the board." You should check check to see what you have set. It is possible you may be sending too high of a signal to your amplifier and therefore clipping and massively distorting the input stage ... At +22dbm the balanced XLR output voltage will be about 18 volts which is a pro audio signal and too much for most consumer grade amplifiers. |
UPDATE: Ok so I am trying out some different - well matching cables tonight guys! Psyched !!! My local Magico dealer - the great folks at Goodwin Audio in Waltham, Ma are letting me try out some Kubala-Sosna Expression Speaker Cables and a pair of Balanced Interconnects tonight. I am pretty excited about this. They tell me they have used Kubala-Sosna in their demo rooms with Magico and used these exact cables with S5's in the past and they know for sure they are a good match so this gets to help reduce some variables here which is awesome! I will try these tonight and update you guys. So hope they help! Also, if these don't do the trick or at least help go in the right directio Goodwin will send out a Magico guy to come over my house and check everything out and help me with set up and listen for themselves to help figure out what the problem/s are, offer me some ideas and help me out. How are awesome are these guys? I couldn't afford to buy new Magico's from them but I can buy some cables and pay them for their service to help me so I am pretty excited. They have been awesome! This is a great dealer and I am very thankful. They as well as you guys have really reduced my audio anxiety - well for now anyways :) I'll keep you posted. Too bad I can add pics on here? |
One of the great Audiogon guys taught my how to load some pics of my rig so you guys can see the room - set up - gear - etc https://www.flickr.com/gp/35630112@N05/1P5i8u https://www.flickr.com/gp/35630112@N05/HD2y33 https://www.flickr.com/gp/35630112@N05/9yvUUG https://www.flickr.com/gp/35630112@N05/3txYa3 https://www.flickr.com/gp/35630112@N05/o724Gc https://www.flickr.com/gp/35630112@N05/2z2H50 https://www.flickr.com/gp/35630112@N05/u2g216 https://www.flickr.com/gp/35630112@N05/pShz2W https://www.flickr.com/gp/35630112@N05/20uNy1 https://www.flickr.com/gp/35630112@N05/cU4h0c https://www.flickr.com/gp/35630112@N05/V5226Q https://www.flickr.com/gp/35630112@N05/52YbJ8 https://www.flickr.com/gp/35630112@N05/29S18Z |
- 112 posts total