2. speakers
  3. 1345201231

Marantz 2270 + B&W DM2000: What subwoofer?

Hello all,

Long time reader, first time poster!

In the past year I've bought a Marantz 2270 receiver, and had it restored to new. I've had the extreme luck to be given a pair of B&W DM2000 (the ones with the pentagonal shape) by someone who just wanted to get rid of them.

The current set-up sounds good as it is, but I can tell something is missing. When I listen to other setups that tend to run for $1k+, I'm usually blown away by the clarity and definition of the sound that I hear. Maybe I am biased against my own gear (the grass is always greener on the other side), but I feel like there's something I could do to make this sound better.

Would I benefit from purchasing a subwoofer? I've done some research and come to the conclusion that I need an active sub, as I do not want to buy another amplifier just to be able to run it. If so, which active sub would pair well with the Marantz amp and the B&W speakers? I am open minded to suggestions, and if something interesting came up with a passive subwoofer, I would not turn it down.

Info:
- My budget for a sub is approximately $500. Willing to go a little bit higher if it's worth it.
- Currently residing in France.
- Would rather have the sub be vintage, so as to follow the rest of my gear.
- I listen to absolutely everything, from Metallica to Eminem, from Michael Jackson to Daft Punk, from Creedence Clearwater Revival to Queen. If possible, I'd like a sub that has flexibility.

I know those are a lot of restrictions, so please feel free to work around them. Thanks a lot!

~a grateful reader
funkymojovibes
rar1's avatar
rar1
1,784 posts
 
So much for posting using a iPhone in a laundromat in Brooklyn. I also would have done a bit more research.

See the attached discussion regarding power output of the Marantz 2270 . The point is the same, there was some anomaly with the power output into 4 ohms.

But back to the DM2000. It was an 8 ohms rated speaker at a minimum of 50 wpc (so much for the 4 ohms argument). Depending on when the DM2000 was manufactured, you have a 30 year old speaker. In what condition are the speaker surrounds and do they require replacing?

Rich
audioconnection
1,271 posts
 
Place the B&Ws on a firm Cement Block a foot off the ground this will help their clarity
You will need 2 small 8 inch subs xed over at 60 or so
Make sure you can hook them up at speaker level. Hook the subs at speaker level by coming off of the remote speaker output jacks on the 2270.... By having 2 subs you will be able to adjust the bass for a better in room response which will improve clarity.
Best JohnnyR
ct0517's avatar
ct0517
2,041 posts
 
Hi Funky

I bought DM2000's new years ago. I still have them - well I should say my brother now uses them. You need an amp with more quality power like your marantz - IMO. They will work with your amp but they will not perform their best. here is the info on them. Scroll down to dm2000.

http://www.bwgroupsupport.com/manuals/bw-archive#ID_DMSeries

Unless they have been abused which is hard to do because they have a protector that shuts them down if you overload them (i.e. overloaded low power amp - not enough headroom). My brother has probably activated the circuit at least 10 times when he wails them out on something like Pink Floyd. 30 years ago I used to use an Onkyo 5060r and matching preamp. I have never owned a pair of B&W that needed work done on speakers surrounds. Regardless of age.

IMO - If you plan on keeping the speakers I would try another amp first - then sub/s only if needed due to maybe their lack of synergy with the room they are in. How big is the room. With the right gear they are full range. 20 - 22hz.

See if you can borrow a quality 200 wpc amp from someone to see how they sound this way first. You will be surprised.
Have fun with them - Cheers
funkymojovibes OP
2 posts
 
Thanks for all the helpful posts! Great input here.

I do tend to play my music pretty loud, when I can. Interesting information about the 2270 here! Maybe it's true that my speakers aren't adapted to my amp... hmmm.

I doubt that the Marantz is running out of gas, since I got a full revision for it to make it brand new about a year ago.

Rar1: So, if I'm understanding this right, the ohm-rating of the 2270 and the DM2000 do not match, which results in the speakers not being driven correctly? If so, I may well have to get some speakers with 4 ohms. Do you know what model the NHT and Wharfedale monitors were? Also, I believe the speakers are in good condition; at least, there's nothing that makes me think that they aren't.

Onemug: is there any chance you have the model of those Altec Valencia cabs + JBL woofer?
JohnnyR: I'll have to try that some day, especially the speaker-off-the-ground thing.

CT0517: Thanks for your input. I guess that it looks like I'll have to invest in another set of speakers for my marantz, and another amp for my B&W's! I do think, however, that the protection circuit doesn't work, because I've never seen any light turn on. Where IS the light on the speakers anyway? So, for my B&W's, I'd need an amp that has high wattage at 8 ohms, correct?

Thanks a lot for all the advice. At least I just didn't go out and buy a sub. Cheers everyone!
funkymojovibes OP
2 posts
 
@Rar1: Wait a minute. If the High Fidelity test you linked me to showed the Marantz running at over 80 watts into 8ohms, and my DM2000's are rated at 8ohms, I shouldn't have a problem, should I?
More to discover