Martin Logan Tweaks / Upgrades

Best tweak I made to all my ML's was to just lightly wedge a 1/2" diameter dowel rod from the back of the top of the speaker to the back wall with blutack on each end (to hold it in place) to make the ESL panel ridged, as it does flap around in the breeze a bit back and forward, did wonders for the imaging/placement and depth visualisation.

Cheers George  

You might try the Synergistic Research  XOT. You can borrow a pair from the cable company. I have a pair on my Summits and they did improve the sound quality not by a lot but is was noticeable. I believe the go for about $450.

I agree with johnsonwu.

check out this site for some ideas:
http://www.martinloganowners.com/forum/

For those who value time alignment, don't bother with this nearly no-cost mod. Lower the front spikes and extend the rear spikes so you can make the panel vertical. Read about that on the Martin Logan Owners website many years ago; did it and loved it and that is where they have been for many years. I did change the power cords and found a minimal change. However, I did it at the same time I changed all power cords in the system so I can't really isolate the affect it had on the speakers. 

George, that's an interesting tweek. Not exactly the most aesthetic thing to do to a beautiful speaker though.

BTW, I have Vantage's.

Thank you!

@johnsonwu - What audio grade substitutes do you recommend? 
And is there a manual or a diagram that I can follow?