Michell Gyro Mk II AC or DC?

Slingshot. I had my eye set on the Gyro SE from the start. I had done all the research, and was ready to take the plunge. I was actually this close from buying the demo from the dealer. Unfortunately, by the time I got the message and called the dealer back, someone had beat me to it by 1/2 hour.

I had looked at all the upgrades that were available to the Gyro. And you are right, it gets expensive! At the end, I realized that it would end up costing me as much as buying an Orbe SE, so I ended up just buying the Orbe SE with the DC motor. On top of that, I got the SME V arm too. I've been happy with the setup and never got the urge to upgrade.

FrankC

Hi,
I recently upgraded to the DC "never connect" HR DC supply from Michell and a new DC Motor.There is a difference in the sound but not what I would suggest as grossly significant.More smoothing out of the high end.I am awaiting delivery of a Bluenote Bellaria the deck is the GYRO Se withe deep platter and the damping material stuck to the underside of the platter.The HR Supply is about five inches long x two and a half incmes wide and one and a half inches deep.with a On/Off switch on the left hand side.My colleague has a DC supply (Michell) which is a black box approx two x two inches.Hope this is of some help.

Alan,
I have a stock Gyro SE DC Motor. So is this "upgrade" a new motor and power supply??? Does it come with new belts???

My unit is a plug into a transformer which is 5x2x2 and then a 4 foot cable up to the motor (a disconnecting cable coupler is in between motor and xformer).

Dave