2. analog
  3. 151964-3674

Mounting Triplanar Tonearm to SME 20/2 Turntable

I just got a Triplanar U2 SE tonearm and am wondering how to mount it to my 20/2.  
The arm board I have is for an SME tonearm.  Until now I've had a SME IV mk vi mounted.  
After removing the SME arm I used the TP jig to see approximate location of the three holes.
Two of the holes land on the aluminum of the board and the third one is in the open hole in the center.  
It does not seem likely that I will be able to use the SME arm board for the TP arm.  Unless using only two holes to mount it will be enough???
I've also wondered about using 3M high bond tape to fix the arm to the board.  I use this tape in my profession and find it to be of excellent strength and longevity.  This doesn't mean that it's an acceptable application.  Just curious.    
In searching these forums and internet searches I have not been able to find a TP compatible arm board for use on an SME TT.  
Please share any info you might have.  Thanks!
128x128snackeyp
jtsnead's avatar
Ag insider logo xs@2x
jtsnead
217 posts
 
I mounted a Triplanar on a SME 10, you @snackeyp might of bought the arm from me? Any how I had an armboard made of Delrin by Brian at Analogue Artisan and worked great he is in New Hampshire and does very good work. If you look at my profile I put some photos of it there. I found it difficult to work with Triplanar as far as getting an arm board   http://www.analogueartisan.com/
pbnaudio's avatar
pbnaudio
1,613 posts
 
As others have suggested make a new armboard  a local machine shop should be able to help you.  Tri’s setup jig is a little “rough” when I mount Triplanar arms I use my DR Feikert jig on the tonearm directly then mark the hole locations on the blank armboard.

Are you selling the 4.5 ? If the price is right I’m interested 

Best of luck

Peter 
tomic601's avatar
tomic601
12,927 posts
 
Happy Triplaner owner here also, I would suggest the visit with Tri to get you up and running and also establish a relationship- wish I was that close to him! He has always treated me well and I bought my arm used here on the Gon. 
On the subject of a third hole, not many two legged stools on the planet, but you can certainly try... 

as far as experimenting with other materials, Why not ? You may pick up some more critical listening / evaluation skills to boot. 
Enjoy your arm, I love mine ( on a Brinkmann Bardo w Lyra - she sings happy
snackeyp's avatar
snackeyp OP
455 posts
 
A friend of mine owns a machine shop and has agreed to make one for me.  BTW, I think the material for the SME original is brass.  I took it off the plinth and noticed it feels much heavier than what aluminum would weigh.  
I'm going to see if I can get the new one made from brass as well.  
Also, a guy in the U.K. offered to make a custom board for 670 UK Pounds.  I think that's more than $800!  Crazy.

snackeyp's avatar
snackeyp OP
455 posts
 
I made a temporary arm board last night from aluminum disk material I found online, and mounted the new tonearm.  It's not real pretty but it works great.  It only cost me about $30 for the materials.  At least I can listen to records while a nicer version is being machined locally.  

The Tri-Planar arm is an amazing work of engineering.  I'm already blown away by it.  I've only played one record and still need to tweak some things, but it's immediately evident that it's a wonderful tracking tonearm.  
More to discover