New Maplenoll Ariadne owner needing advice


I have recently purchased a maplenoll ariadne. I have tried to learn a little about the table but find very little information. I know the table was discontinued in the 90's but the little i have found indicated it is a very good table. I am interested to learn if there are any tricks or problems to optimizing this table. As most of you probably know, it is an air bearing platter and tonearm. I plan on putting my zxy airy 3 on the arm once I get it set up.
oilmanmojo
Readers: This weekend I received a flyer in the mail from www.harborfreightusa.com, detailing sales to 6/9 including a Central Pneumatic, Quiet Pump: Oiless Compressor,1/4 horsepower (rated) with Air Tank Capacity 3 Gallons (Model # 90168). According to a review of the manual the max. pressure is 120 PSI, Air flow Capacity.5 CFM@90PSI,.7 CFM@40PSI with a weight of 18 LBS. The sale price $67.00(regular price $84.99); the pump is made in China. The pump pictured in the flyer is complete with regulators ; gauges and pressure switch (all UL listed). Perhaps a replacement to Maplenoll quiet pump ?? Personally, I'm going to drive to the nearest outlet to give it a look over as a reserve unit. Just want other 'Nollers to know the information.
R: I drove to the closest Harbor Freight and "auditioned" the quite pump. The news is mixed. It appears the pump can power a 'Noll and while it is "quiet" no Super Quiet here. The pump seems quieter than the origional 'Noll 20 PSI but much noiser than the Super Q. It requires a sound damping enclosure and placement far,far away but on a tight budget with no where to go ... It is a inexpensive limited option for the DIY'er but no Super Q. I only used it @90PSI so perhaps its a tad quiter @40PSI.
my experience is the oiless pumps are alway noisier than a corresponding oil based compressor. Not sure why but the specs with most brands confirm this. Having said that, the price is right for this compressor. You could mount in a separate room and run the tubing pretty easy thus eliminating the noise issue in the listening room. I did that when i had a shop air compressor in my workroom at my previous location.
Crem1

Is the cfm at 40psi high enough for the arm?

Also, is there anyone that can look at their Super Quiet pump and see what make and model it is?

The problem with the stock (any of them) pumps is that they are not oiless.

-Jim
Jdubs: 40 PSI is about right for the 'Noll tonearms. As I understand the Maplenoll Super Quiet Pumps were made in Canada and are devoid of most label/plate markings (at least mine is). They are heavy, black and football++ sized. Someone sugested that they were refrige-type pumps but I don't know that factually. The SQP is not like a most brand pumps but was a "homemade" by Bob Dilger.