New Tweak --- Its Fantastic


THE NEW TWEAK

Over the good part of this past year I’ve been beta testing a new tweak, the name of which is "Total Contact." Its a hi-bred graphene contact enhancer that is different from all other contact enhancers that have come and gone for one reason or another. I’m not new to these contact enhancers, having had quite a bit of experience with a product developed by the late Brian Kyle and his "Quick Silver" contact enhancer. The "Total Contact" is different ... a LOT different.

"Total Contact" is graphene based and is not a vibration control. It eliminates micro-arching between two contacts. Micro-arching, much like Micro-vibration smears the sound in our stereo systems. Its the type of distortion that we don’t know is there .... until we eliminate it. There is no break-in as we know it. The sound is improved right off the bat, but what you hear is only a smidgen of what’s to come.

I tested three generations of "TC," each of which was an improvement over the previous incarnation. The final mix was cryogenitically treated and made for a more effective, much smoother application. It comes in a large hypodermic needle type plunger containing 1.5 ml of product and includes a instructional DVD and an application brush.

The application should be applied with a very thin coat to all of your electrical connections .... from your cartridge pins to your power cords. I did my entire system, including the ends of my fuses.

Upon initial application, you will notice an improvement in clarity, correctness of tonal balance and a more overall organic sound. But ... that is just scratching the surface of what this magic paste does. As it cures, the improvements become more apparent. Much more!

There are two real break-through events that happen almost to the day with "Total Contact," one at four weeks and another at eight weeks . At four weeks, you’ll get a real jump in clarity and overall improvement. That’s only a taste though of what’s to come at eight weeks. At eight weeks your system’s focus will make a jump in SQ that is so real - its surreal.

After 40 years in the hobby, and a total tweak nut, I have never heard anything that does what this graphene paste does. The see-through clarity at eight weeks becomes simply amazing. The "paste" eventually cures into a kind of polymer plastic and it seems that the sound improves with each listening session. So, its important that you leave your contacts alone for the duration. If you’re the type of person that continually switches wires in and out, you’ll have to re paste until enough time has elapsed to get "the cure."

The only problem I had was with the first batch and that had to do with shorting out a tube pin in the line stage. Use the "TC" very sparingly on tube pins, if at all. I only had problems with the line stage tube pins. The Amp, CD Player and Phono Stage has had no tube pin problems at all.

Tim Mrock, one of our fellow A’goners, is the developer of the product. Its taken Tim 15 years and several patents to get it right. Tim has "pasted" every electrical contact he can find in his audio system, all of the switches in his circuit breaker box, every contact in his car ... and has used it in commercial applications such as hospital circuit breakers, surgical lights ... and other places where efficiency and long life of electrical components are deemed important.

This product is highly recommended to anyone who truly wants to get the most out of his/her audio systems. There’s enough product in each tube to do at least two audio systems as it just takes a very thin coat on each application to be effective. The last tube was enough to do my system twice and then a friend’s system this past weekend.


Frank

PS: There were a couple of other A’goner beta testers of this product as well. Hopefully, they will chime in here with their experiences for comparison. I "pasted" both of Steve Fleschler’s systems a few days ago, perhaps he will comment on his results too. We forgot to paste Steve’s power cords though, so there’s a lot more to be had from Steve’s two fantastic systems.

Frank
128x128oregonpapa
How much of the fabulous effects could I get by using graphite powder (which is a multi-layered and certainly much less potent form of graphene) in a WD40 (or similar) suspension?
Maybe for some of us on a budget, or just cautious, this could be a first step...and free
Uh, WD40 is not conductive so I kind of doubt you’d have much luck with your designer concoction. In fact, it would be self defeating. 
WD40 is a penetrant although somehow it has falsely become known as the ultimate lubricant. It is also extremely flammable. Spray some into a small empty food can or other similar container (outside) and ignite it. Watch out though! I never use WD40 for anything.
I must admit that this thread has certainly changed in tone since some posts were deleted. Whether they met the criteria for deletion or not the deletions certainly seem to have changed the tone for the better. So, thank you moderators. As to claims about improving electrical efficiency I would assume that any time you can reduce resistance you improve efficiency since resistance is dissipated as heat. Lower the resistance and therefore the amp draw for a given application and it will be more efficient. Now, does this paste do that? That's the big question isn't it?  I remain agnostic (not a religious term) on the issue although Graphene certainly has interesting properties.
Now that the name-calling and veiled insults on this thread have been halted by the moderators, I’ll weigh in on this tweak.

First, the notion that the absence of a money-back guarantee on this product should arouse suspicion is just a red herring. Many things are sold without a money back guarantee. If you want to buy a house, a new car or a phono cartridge, you’ll have to conduct your due diligence, and then be willing to assume some element of risk. (Although, in the heyday of the LP era, my audio dealer did offer money-back on phono cartridges. But those days are long gone, I think.)

This not a tweak I’m inclined to try. It’s not the cost, which is less than a set of tubes for my tube amplifier. It’s that I prefer connections to be clean and tight and - obviously - this goop would violate that. And if I tried it and didn’t like the result - then what? How do I get the goop off of those connections?

Does this goop work? I have no idea but I wouldn’t dismiss it without some first-hand experience. There are some who believe that their knowledge of physics or electronics, or who put faith in what they read in magazines or online forums, allow them to divine the sound of something without listening. I claim no such clairvoyant power.