Oyaide P004 and C004 plugs


Hi everybody hearing a sound difference in sound with furutech plugs which I did not like for too much of warmth I went in for new Oyaide P004 and C004 and terminated the power cable of the DAC but now the sound is hard and aggressive could anyone has experience with these plugs will they smooth out with time and how many hours of burn in  

128x128jasbirnandra

+1 on the SonarQuest. I have used both the silver plated copper and pure copper.

Listen to Steve. The wiring/cabling is more important than the connectors...

Just ran in set of fi 28r and they are wonderfull sounding...Nice open soundstage and i feel they are the sweet spot in furutech’s offerings.No hint of the typical minuses of rhodium.Indeed alot of hrs on them has made the difference.

(Steve's word is well founded and taken,its everything though imho)

Im really curious about the sonarquest stuff...I like the lego but man that iec is tough to wrestle with.Suppose the sonar's would be much the same.I dont have near the skills that "williwonka" has at his craft...trust his judgement on these things though.Everytime i say im done putzing around with wire/ac/sc.😖

@digsmithd - agreed - The Sonaquest IEC’s provide the best "clamping" of any IEC connector I have tried - their contacts are noteceably thicker than other brands and I often insert them into a spare socket to loosen them up a little before inserting into components.

Sonarquest contacts (mains and IEC) are very well engineered (i.e. very flat) and their silver plated copper seems to provide the best energy transfer of any plug I have tried and they have a subtantial thickness of plating, making the number of insertions before the silver wears off very high. They also have very strong screws that allows for very tight clamping of the wires

  • Note: all of my silver plated copper connectors have yet to wear through to the copper,
  • due to the frequent prototyping of my cables, the number of insertions a plug is subject too is significantly higher than most people will experience with normal use
    • NOTE: I do use hosital grade MRI outlets everywhere throughout my, which may also provide better wear.

Another good silver plated copper conncetor is from Vanguard, but the plating is not quite as robust, the contacts are not as flat and the IEC’s do not clamp as tightly. But if you are on a budget I would highly recommend them - they are not far behind the Sonarquest from an overall performance persective

Regards - Steve

 

I think i will have to pop for set....I do have a power wire i need to eventually terminate...thx again steve for vote of confidence in the sonars.It helps solidify the decision.