Parallel SET with sufficient power


Hello all:  I'm looking to move back into SET land after 15 years. I have a pair of KEF Reference 3's at 88 dB sensitivity which I'd like to keep, so I'm considering a parallel Single Ended design with at least 30 WPC. I do like the '300B sound' so friends have recommended the 6C33c tube in parallel to deliver 30-40 WPC. I've read some very positive posts on Audio Mirror and Wall Audio of Germany was briefly mentioned. Smaller boutique like companies give me some concern as most of these fine designers or engineers build amplifiers in their spare time, and quality control may be compromised.  I'm not a huge fan of 211 or 845 sound but these amps are another option.  Thanks for allowing me to think out loud and I do appreciate all opinions!

normie57
I know Vlad Bazelkov with Audio Mirror personally, and can attest to his knowledge and helpfulness.  Great guy, and his gear both sounds great and is very well built. He does some unique things with his designs, and he can answer any questions and concerns you might have about speaker match-ups.  contact@audiomirror.com.  Tell him Keith sent you :). Good luck!
@ normie57,

You might want to read this; it will help you understand the issues of driving a speaker with various kinds of amps.

http://www.atma-sphere.com/Resources/Paradigms_in_Amplifier_Design.php

If you are planning to use an SET, the speakers you have in mind do not seem appropriate. They are intended as Voltage Paradigm devices where the amps you are contemplating are Power Paradigm devices. The combination often results in a tonal coloration (which Al mentions above). If you are planning an SET, more efficiency is recommended to really hear what the SET can do. As a general rule of thumb the speaker in the room should be efficient enough that the amp never exceeds about 20% of full power.

Good Luck!
I appreciate your candid and very helpful comments. I will rethink my decision, for once before the purchase!  Thank you all, especially Al and Ralph.

Parallel SET with sufficient power
Parallel GM40's monoblocks
More power better sounding tube. And has 4ohm taps.
The negative phase angle of the Kefs is not severe, so the amps should drive them well.

http://www.tubeguru.eu/poweramplifiers-/gm-70-pse-triode-parallel/

Cheers george