@avanti1960 and @jjss49
Thanks for your feedback and suggestions, good information for me to digest as I consider the next step.
I noticed that like me, Herb Reichert (Stereophile reviewer) was using both the Holo Spring DAC and Rogue ST100 power amp in his reference system. He was using the Rogue RH-5 as his linestage but later replaced it with the Rogue RP-7 pre-amp. @avanti1960 aside from the inferior dynamics, did you feel that the RP-7 was otherwise better than the RH-5 or did they sound pretty much the same?
We appear to only have one Rogue dealer in Oz, about 600 miles away, so I won't be able to try the RH-5 or RP-7 without buying and there's also no Rogues on the "used" market here. I haven't got the $$$ for a new RP-7 at the moment but I could possibly grab the RH-5 if the dealer here has it.
The Cary SLP98 suggestion is interesting but if we suspect the use of the Rogue ST100's SE inputs is the cause of the lack of dynamics, I hesitate to buy another SE only pre-amp.
I've always run my Rythmik sealed subwoofer (30k Zin) off the second pair of SE outputs on the Herron VTSP-3. It shouldn't be an issue as the ST100 is an easy 200k Zin for SE and the Herron's Zout is quite low at 100 ohms from memory. However, in the next few days I'll change the connection over to the sub's high level inputs running off the ST100's speaker outputs to ease the loading on the Herron and see if it makes any difference to dynamics. I had the sub connected that way when I was trying out the Kinki EX-M1 as it didn't have a pre-out output for the sub.
Thanks for your feedback and suggestions, good information for me to digest as I consider the next step.
I noticed that like me, Herb Reichert (Stereophile reviewer) was using both the Holo Spring DAC and Rogue ST100 power amp in his reference system. He was using the Rogue RH-5 as his linestage but later replaced it with the Rogue RP-7 pre-amp. @avanti1960 aside from the inferior dynamics, did you feel that the RP-7 was otherwise better than the RH-5 or did they sound pretty much the same?
We appear to only have one Rogue dealer in Oz, about 600 miles away, so I won't be able to try the RH-5 or RP-7 without buying and there's also no Rogues on the "used" market here. I haven't got the $$$ for a new RP-7 at the moment but I could possibly grab the RH-5 if the dealer here has it.
The Cary SLP98 suggestion is interesting but if we suspect the use of the Rogue ST100's SE inputs is the cause of the lack of dynamics, I hesitate to buy another SE only pre-amp.
I've always run my Rythmik sealed subwoofer (30k Zin) off the second pair of SE outputs on the Herron VTSP-3. It shouldn't be an issue as the ST100 is an easy 200k Zin for SE and the Herron's Zout is quite low at 100 ohms from memory. However, in the next few days I'll change the connection over to the sub's high level inputs running off the ST100's speaker outputs to ease the loading on the Herron and see if it makes any difference to dynamics. I had the sub connected that way when I was trying out the Kinki EX-M1 as it didn't have a pre-out output for the sub.