@hook68 - Look for used. A Herron Audio VTPH-1 is an outstanding phono stage and probably could be found in your price range. Like @bdp24 wote, Keith Herron takes trades. He might be a good source for a deal on a used unit. Email is your friend with that 7 hour time difference.
Phono cable and preamp for soundsmith Carmen mk2
A year ago I decided to update my stereo system and soon after also thought I should be able to play my vinyls (not played in 15-20 years).
I started of with a modest turntable, a used project 2Xperience SB(~1500$), supplied with original turntable cable (PRO-JECT CONNECT-IT E for ~50$). Cable has low capitance but is porly shielded.
Didn’t have a clue about what pickup to choose. After a recommendation I purchased a Soundsmith Carmen Mk2, a moving iron cartridge. I believe it can be used with an improved setup.
For preamp I bought a project Phono Box DS2 USB(~500$), I thought it would be nice to be able to record some of my old albums. I did set it up with a optic cable towards my amplifier. Something was missing, I learned that it was a mistake to use optic cable, the sound was clear but not analog. Now I use a Pangea Premier Interconnect (RCA) between phono preamp and amplifier.
This weekend I have evaluated better turtable cable, a Oyaide PH-01RR RCA-RCA (170$) with total capacitance:160pF (cable 100pF/m ). It was an improvement, mostly due to shielding I belive.
It is said to be designed for MM, but to my knowledge has rather high capitance: http://www.canyonaudio.si/wp-content/uploads/2011/10/PH-01RR_release-ENG-PDF.pdfWhat
I have now learned that MM cartridges should be used with cables of low capitance, I assume that is valid for MI as well. One of the recomended, at my current price range and knowledge, is Furutech AG-12 R4(~500$). Do not know if the furutech is the best for MI/MM.
- Any suggestion regarding turntable cable (2rca->2rca+ground)?
- What are the parameters I should look into?
- Should I go for a silver cable? Shielding and contacts?
Considering updating phono preamp to Soundsmith MMP3 mk2 Phono Preamp, should match the Carmen. Can’t find many reviews. Max phono preamp cost perhaps 1500$.
The aim is that the preamp could be used with a better turntable, perhaps a VPI scout. Will turntable cable caracteristics have impact on the MMP3 settings and finally sound properties/quality?
I’m not a true audiophile but I appriciate ”good” sound quallities!
I do not have possibillty to try to many types of cables due availabillity and distance to shops.
Regards
Hakan
Ps Sorry about the poor english, I from Sweden :-)
I started of with a modest turntable, a used project 2Xperience SB(~1500$), supplied with original turntable cable (PRO-JECT CONNECT-IT E for ~50$). Cable has low capitance but is porly shielded.
Didn’t have a clue about what pickup to choose. After a recommendation I purchased a Soundsmith Carmen Mk2, a moving iron cartridge. I believe it can be used with an improved setup.
For preamp I bought a project Phono Box DS2 USB(~500$), I thought it would be nice to be able to record some of my old albums. I did set it up with a optic cable towards my amplifier. Something was missing, I learned that it was a mistake to use optic cable, the sound was clear but not analog. Now I use a Pangea Premier Interconnect (RCA) between phono preamp and amplifier.
This weekend I have evaluated better turtable cable, a Oyaide PH-01RR RCA-RCA (170$) with total capacitance:160pF (cable 100pF/m ). It was an improvement, mostly due to shielding I belive.
It is said to be designed for MM, but to my knowledge has rather high capitance: http://www.canyonaudio.si/wp-content/uploads/2011/10/PH-01RR_release-ENG-PDF.pdfWhat
I have now learned that MM cartridges should be used with cables of low capitance, I assume that is valid for MI as well. One of the recomended, at my current price range and knowledge, is Furutech AG-12 R4(~500$). Do not know if the furutech is the best for MI/MM.
- Any suggestion regarding turntable cable (2rca->2rca+ground)?
- What are the parameters I should look into?
- Should I go for a silver cable? Shielding and contacts?
Considering updating phono preamp to Soundsmith MMP3 mk2 Phono Preamp, should match the Carmen. Can’t find many reviews. Max phono preamp cost perhaps 1500$.
The aim is that the preamp could be used with a better turntable, perhaps a VPI scout. Will turntable cable caracteristics have impact on the MMP3 settings and finally sound properties/quality?
I’m not a true audiophile but I appriciate ”good” sound quallities!
I do not have possibillty to try to many types of cables due availabillity and distance to shops.
Regards
Hakan
Ps Sorry about the poor english, I from Sweden :-)
- ...
- 26 posts total
- 26 posts total