I have a VPI Scout with the option of using either the 300RPM or 600RPM motor and I also use a Walker Audio motor controller and can say most confidently that upgrading the power cord from the wall to the Walker had a very positive effect to the bass solidity/agility and soundstage solidity as well. I also upgraded the male AC connector on the power cord that connects the Scout motor to the Walker with an Oyaide P-079 AC male connector and this added further refinement such as sweeter highs and more fully fleshed out harmonics.
Is it worth the added expense for these upgrades? Only if you want to extract the maximum resolution from your rig/records and from the Scout Master that is quite a big chunk! May I suggest that you contact The Cable Co. and utilize their Cable Library where you can try out power cords/cables in your own home for a week and that gives one the opportunity to make an informed decision using their own system and their own ears as the arbiter.
Here's their link with all the details: http://www.thecableco.com/
Cheers
Is it worth the added expense for these upgrades? Only if you want to extract the maximum resolution from your rig/records and from the Scout Master that is quite a big chunk! May I suggest that you contact The Cable Co. and utilize their Cable Library where you can try out power cords/cables in your own home for a week and that gives one the opportunity to make an informed decision using their own system and their own ears as the arbiter.
Here's their link with all the details: http://www.thecableco.com/
Cheers