PreDAC for Rowland 201 monoblocks

I have the Capri matched to a set of Rowland 501s. Trumps some of the older ARC equipment it replaced. Rowland equipment in general is fun to tweak, experimenting with cones, bases, dots and such. The performance potential of Rowland gear is somewhat amazing, and when everything comes together it can be a revelation. I believe, however, this is also true of many different components that underperform in home systems due to a lack of experimentation and patience.

Very true Brauser, and with Capri, one must allow at least 500 hours of break in time. Capri is also somewhat sensitive to power cords. I have not experimented with cones on Capri. In theory at least, the Rowland PC-1 rectifier based on active power correction (PFC) can be applied to Capri and Capri S2.... However, I found that PC-1 made my original capri slightly congested, while it does wonders for amps like M102, M125, M201, M501, and M525. G.

I found Mapleshade maple boards and brass cones to work well with Capri. Any favorite power cords for Capri Guido?

Hi JL35, I like very much Shunyata chords on Rowland gear, particularly the last two series: Z-tron and CX. Depending on your budget for a PC on Capri, you may want to have a look at the Python Z-tron or a used Python CX. They tend to yield great staging and imaging, with lots of harmonics and even frequency distribution, and absolutely no behavior oddities at the top or bottom. Guido

hey gents... this is meant to be about PreDac's to use with JR 201 and SF Luito towers.