Why not soliloquy speakers all around since you already like them. You should be able to find Sat-5's for $400/pr and a center for $400. These would sound great with the Rotel.
Receiver Rotel? and Speakers Maggies? for HT?
Hi,
I need to buy sound gear and video switching for our HT (front projector). Already have a 2-channel separate music system which I love (tube amp with Soliloquy speakers).
Room is about 16x30 with angled ceiling (1.5 story house) on the sides, so speakers for rear surrounds must be small/flat and wall-mountable. Detailed sound processing and clear dialog are number one priorities, without sounding too bright.
Since there do not appear to be any reasonably priced pre/pros ( = 100MHz bandwidth, I've resigned myself to buying a receiver with pre-outs instead. I've got a couple of 2-channel amps with an honest 100W/channel rating floating around, and could always buy another used amp if necessary. The top contenders right now are Rotel RSX-1056 and RSX-1067, though I'm not sure the 1067 (100Wx7) is worth $900 more than the 1056 (75Wx5 with 2 preouts for the other 2 channels).
Thought of getting the new Magnepan MMG W and MMG C speakers, augmented with a Dayton Titanic 10" sub (or 2 if needed). They look nice and fit flat against the wall, perfect for our room. Imaging and clarity are supposed to be their strength, and the lack of bass is made up by the sub(s). Trouble is, they are 4ohm speakers and supposedly difficult to drive. Question is, how are they for HT, would they be "loud" enough for our room, and can the Rotel receivers handle them or will I likely require outboard amplification?
Sorry for the somewhat lengthy post, but I figure more info is better than not enough. You may not have all the answers, but any advise or experience with respect to the above choices are greatly appreciated!
Thx,
Frank
I need to buy sound gear and video switching for our HT (front projector). Already have a 2-channel separate music system which I love (tube amp with Soliloquy speakers).
Room is about 16x30 with angled ceiling (1.5 story house) on the sides, so speakers for rear surrounds must be small/flat and wall-mountable. Detailed sound processing and clear dialog are number one priorities, without sounding too bright.
Since there do not appear to be any reasonably priced pre/pros ( = 100MHz bandwidth, I've resigned myself to buying a receiver with pre-outs instead. I've got a couple of 2-channel amps with an honest 100W/channel rating floating around, and could always buy another used amp if necessary. The top contenders right now are Rotel RSX-1056 and RSX-1067, though I'm not sure the 1067 (100Wx7) is worth $900 more than the 1056 (75Wx5 with 2 preouts for the other 2 channels).
Thought of getting the new Magnepan MMG W and MMG C speakers, augmented with a Dayton Titanic 10" sub (or 2 if needed). They look nice and fit flat against the wall, perfect for our room. Imaging and clarity are supposed to be their strength, and the lack of bass is made up by the sub(s). Trouble is, they are 4ohm speakers and supposedly difficult to drive. Question is, how are they for HT, would they be "loud" enough for our room, and can the Rotel receivers handle them or will I likely require outboard amplification?
Sorry for the somewhat lengthy post, but I figure more info is better than not enough. You may not have all the answers, but any advise or experience with respect to the above choices are greatly appreciated!
Thx,
Frank
- ...
- 14 posts total
- 14 posts total